Contents
How do I set up SpyServer?
Server: Setting up SpyServer on Windows
- Log on to the Windows PC that you want to be the remote server.
- Go to www.airspy.com/download and download the latest version zip file of SDR#.
- Run the install-rtlsdr.
- In the SDR# folder find the file spyserver.
- Edit the ‘device_type’ line to show ‘device_type = RTL-SDR’.
What is SoapyRemote?
SoapyRemote. SoapyRemote provides access to SoapySDR hardware-abstraction API through a TCP/UDP server. It runs on Linux and requires installing the SoapySDR library and drivers for at least one of the supported SDR hardware devices.
How do you start an Airspy?
You just plug Airspy and Windows will download and install the right driver for you….Installation on Windows Vista, 7, 8, 8.1 and 10
- Download and unzip the WinUSB Compatibility Driver.
- Open the device manager and select Airspy.
- Select “Update Driver” then “Browse My Computer” to the inf file.
What is Rtl_tcp?
If you weren’t aware, rtl_tcp is a program that allows you to run your RTL-SDR remotely, and connect to it over a network connection.
What is an SDR upconverter?
An upconverter converts lower frequencies into higher frequencies. For example, an upconverter is commonly used to convert HF signals into VHF, so that VHF/UHF only SDRs can receive HF. In the video he uses the HackRF as a local oscillator source, a cheap RF mixer on a breakout board, and an Airspy as the receiver.
How to test if gqrx has detected rtl-sdr?
After Gqrx is finally installed, open a terminal and type dmesg -w | grep -i rtl to find out if the RTL-SDR has been detected and started correctly. Now, plug in the RTL-SDR dongle and watch the dmesg output.
What kind of SDR do I need for garage door remote?
Gqrx is the software which we’ll be using to receive and visualise the radio signals being transmitted by the garage door remote. It is free and open source, but currently is only supported on Linux and macOS. Before we can do anything with our SDR, we need to ensure Gqrx is installed and ensure that the SDR’s drivers are working.
Where do I find gqrx in my terminal?
Do this by typing gqrx in a terminal, or finding it in your applications menu. You should be greeted with a screen asking you to configure your I/O: In the “Device” drop-down, select the “Realtek RTL2838” device. If it doesn’t exist, your RTL-SDR is likely undetected. You might need to re-connect your device, or potentially reboot your system.
Can you use gqrx on a garage door opener?
A garage door opener, or some other RF thingy to investigate. Gqrx is the software which we’ll be using to receive and visualise the radio signals being transmitted by the garage door remote. It is free and open source, but currently is only supported on Linux and macOS.