Contents
How do you check a SMPS is working or not?
Solution :
- Remove the connections that are connected to motherboard from SMPS.
- Use a paper clip and bend it in U shape. Locate the green and select any one of the black wire of the bigger connector.
- Connect the Power cable and Power on the SMPS.
- The SMPS Fan Will Spin, if it is working.
How do I test my power supply output?
Test the power supply with a power supply testing unit.
- Connect the power supply testing unit to the 20/24 pin connector.
- Plug the power supply back into the outlet and turn it on.
- Check the voltages.
- Ensure that the voltages are within normal accepted tolerances.
- Test the other connectors.
What is the output of SMPS?
SMPS Power Supply, Output Voltage: Dc 12 V, Input Voltage: Ac 150 To 280 V
| Output Voltage | DC 12 V |
|---|---|
| Input Voltage | AC 150 to 280 V |
| Current | 3 Amp and Also 2 to 20 Amp |
| Output Type | Single |
| Frequency | 50 to 60 Hz |
What happens when SMPS is faulty?
Typical problems are blown up power transistors or rectifier diodes, especially on the primary side. Often SMPS include protection components such as additional resistor or Zener diodes to reduce damages in case of failure, but not always. Before going to far in replacing, make sure you check all the parts.
What are the two wires needed to connect to test the power supply?
5 Answers
- Plug the power supply into the wall.
- Find the big 24-ish pin connector that connects to the motherboard.
- Connect the GREEN wire with the adjacent BLACK wire.
- The power supply’s fan should start up.
- If the fan starts up, then it could be the motherboard that’s dead.
Why SMPS is not working?
Take a small piece of wire and connect one end in GREEN wire port and other in the BLACK. Switch ON the supply if the fan in the smps is working the smps is good. If not open the cover and check whether the Capacitors inside the Smps is bulged on the top.