How do you extrude a curved surface?

How do you extrude a curved surface?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face:
3. Select other faces to define the extrude as required.
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do you extrude a curved surface in Creo?

1. Add a new plane above the curved surface and draw a sketch on it.
2. Click on Offset on the Editing Tab.
3. Select the curved surface (hold down the Alt key to do this)
4. Select the ‘With Draft’ option top left corner of screen.
5. Click in the sketch collector box and select your sketch.
6. Add the depth you require.

How do you use the Hole Wizard on a curved surface?

Using Hole Wizard on a Curved (Cylindrical) Surface

1. Start by inserting a Hole Wizard feature (Insert > Feature > Hole Wizard), specify the Type of Hole, then click on the Positions tab and select on the 3D Sketch button.
2. Hover over the curved surface and click to place the hole (Sketch Point).

Can you sketch on a curved surface in Solidworks?

To project a curve: Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

Can you sketch on a curved surface in Creo?

Select the Curved surface On the Model > Select Offset > Change Offset Type to Expand Feature > Select Sketch from Model Tree NOTE: This step will only work with sketched geometry; will NOT work with the Text Tool inside of a sketch.

How do I write text on a curved surface in Creo?

Select the curved surface with the wrapped text and, under the “Model” menu tab, select the “Offset” option in the “Editing” group. Change the offset type to “Expand Feature” using the drop-down menu. In the “Options” tab, select “Sketched Region” and choose the sketch created with the projection of the wrapped text.

How do I extract a surface in Solidworks?

To manually extract surfaces, select a sub-mesh, then select a surface type under Face Settings. When you extract surfaces, you might see salient sub-meshes (arrows), which are transitions between primary mesh regions.

Can you use extrude on an open geometry?

If you apply extrude command on an open 2D geometry a surface will always be created irrespective of the mode selected. Extrude command can be used on Regions too, and you will be able to select Solid or surface mode for Regions also.

What should be the taper angle of extrude?

Specifying large angle may cause faces or loop of the object to meet at a point before reaching extrude height so try to add appropriate value to the taper angle of extrusion. In the image below the taper angle of 10 degrees is applied to the pentagon shape.

What’s the best way to use the extrude command?

Use TXTEXP command which is also known as Text Explode command for exploding text in the drawing. After Exploding the text use OVERKILL command to remove redundant geometries from the exploded text. Join the text geometry wherever required then apply extrude command on it.

What makes a surface extrude to a point?

Creates a solid by driving a surface to a point. a surface. the point to extrude to. History enabled… Changing the input objects changes the output objects. Related topics…