Contents
To reset garbage disposal follow these simple instructions:
- Make sure that the disposal switch is in the “OFF” position.
- Gently press the red button in to reset garbage disposal.
- Turn on a cold stream of water and turn the disposal switch to “ON” position, the disposal should now run again.
Where should a garbage disposal button be installed?
The best location for the disposal switch is an airswitch on your counter, next to the faucet. It will not harm or crack your granite to have the air switch there.
What is an air switch on a waste disposal unit?
A garbage disposal air switch activates your disposal by pressing a button, which sends a pulse of air through PVC tubing to a control box underneath your sink which contains an air pressure switch. The disposal air switch is compatible with most garbage disposals and installation is easy!
How does Insinkerator button work?
How Does The Air Switch Work? When you press the push button initially, it triggers a pulse of air towards the power control unit. The air goes through tubing connected between the button and the control unit. Once the control unit receives the “air signal”, it turns on the power to your disposer.
How do I turn on my Insinkerator?
- Run a medium stream of cold water.
- Turn on the food waste disposer using the air switch or wall switch.
- Gradually feed the food scraps into your food waste disposer and push it down the baffle.
- After feeding in food scraps, leave the cold water running for another 10 seconds.
- Turn off the tap and food waste disposer.
What is a sink mounted air switch?
The switch is a convenient and alternative method to turn on your garbage disposal. It uses air pressure instead of electricity to activate your unit. So it reduces the potential of an electric shock when you’ve wet hands. The air switch is a push button mounted on your countertop or kitchen sink.
Are air switches safe?
There is also still a risk of electrical shock to consider with a garbage disposal air switch. The puff of air might activate the unit, but you must use a grounded outlet to supply power to the appliance. Failing to do so could cause current-based injuries by touching the sink or countertop when it is operating.
How do you fix an Insinkerator switch?
Make sure that the food waste disposer is switched ‘OFF’ at the socket. Gently press the red button in to reset the disposer. If it does not stay in (retracted), wait ten minutes and try again. Turn on a cold stream of water and turn the disposer switch to “ON” position, the disposer should now run again.
How do you troubleshoot an Insinkerator?
Problems can be troubleshooted.
- Unplug the Insinkerator, or switch the Insinkerator off at the circuit breaker panel.
- Press the red button on the underside of the Inskinkerator.
- Peer into the disposal chamber with a flash light.
- Turn the water on again, and then the disposer.
- Clean the disposal if it smells.