Contents
How do you measure a Kv brushless motor?
The formula to calculate Kv for a brushed DC motor is to just divide the speed by the generated DC voltage that you measure using your multimeter. Another option for brushless motors is to buy a BL motor tester that will calculate Kv for you.
How do you test a Kv motor?
It is measured by the number of revolutions per minute (rpm) that a motor turns when 1V (one volt) is applied with no load attached to that motor. The Kv rating of a brushless motor is the ratio of the motor’s unloaded rpm to the peak voltage on the wires connected to the coils.
Is a higher kV motor faster?
Generally speaking the more Kv a motor has, the more RPM and more power. For example, a 9000Kv motor would be faster than a 2200Kv motor. If Kv is like horsepower, then Turns is the physical attribute of a motor.
What is the Kv rating of a brushless motor?
The kV rating (not to be confused with kilo-volt) is the RPM of the motor (k) per volt (V) with no load. For example, a brushless motor with a kV rating of 3000 powered by a 12V power source would be capable of 36,000 RPMs (multiply 3000×12). This is the max RPMs that this motor can reach under no load.
What do you need to know about Kv rating?
Knowing the Kv rating of a motor is helpful to determine which motor belongs in which aircraft. An FPV racing quad, for example, requires high rpm for high speed, so you would use a high Kv motor and a small-diameter prop.
What are the specifications of a brushless RC motor?
Understanding Brushless RC Motor Specifications. For example, a brushless motor with a kV rating of 3000 powered by a 12V power source would be capable of 36,000 RPMs (multiply 3000×12). This is the max RPMs that this motor can reach under no load. A motor with a higher kV will have more top end speed, but not as much acceleration/torque.
What’s the best way to measure the kV?
The typical way to measure Kv is to spin your motor at a known RPM and then measure the voltage generated on the motor leads. Many hobbyists use a drill press to spin the motor. You could also use another motor. You can measure the RPM with a tachometer or strobe.