How do you revolve in CAD?

How do you revolve in CAD?

To revolve as a surface, follow the below steps:

1. Type REV or revolve on the command line or command prompt and press Enter.
2. Type M or mode on the command line < press Enter.
3. Type Surface or S on the command line < press Enter. Select the object to revolve with a small square cursor, as shown below:

What does revolve mean CAD?

REVOLVE ignores the width of a polyline and revolves from the center of the path of the polyline. The right-hand rule determines the positive direction of rotation. The following prompts are displayed. Objects to Revolve. Specifies the objects to be revolved about an axis.

What is revolve in 3D modeling?

Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material.

What is revolve tool?

ℹ️ This tool is available to all users. You can create solids such as sphere, cylinders, and cones by revolving faces or closed sketches with the Revolve tool. Not only that, but you can also create helical objects by adding height to your revolved sketch or face.

What is the difference between extrude and revolve?

Extrusion. Extends the shape of a 2D object in a perpendicular direction into 3D space. Revolve. Sweeps a 2D object around an axis.

Which command will give you a solid object?

AutoCAD gives you two commands for those times when you need to draw cylindrical objects. One (revsurf) will give you a complex model comprised of a 3-D surface made up of many facets. The other (revolve) will give you a solid object.

What are the two components necessary for creating a revolve feature?

There are two ways to created revolved features: from a sketch profile or from a primitive….Create Revolved Feature from a Primitive

• Join . Adds the volume created by the revolved feature to another feature or body.
• Cut .
• Intersect .
• New Solid .

What is use of revolve feature?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

What is Revolve Extrude command?

The Revolve command is conceptually the same as the Extrude command: you have a 2D base shape but instead of extruding it, it is revolved around a specified axis and with a given angle.

What is the difference between extrude and Presspull command?

If you use the Presspull command on an existing face then a simple extrusion will be created but if you press and hold the CTRL key and then use Presspull command on the surface then the extrusion will follow the geometry along the profile of 3D solid as shown in the image below.

How do you make an object solid in AutoCAD?

To Create a 3D Solid by Extruding

1. If necessary, on the status bar click Workspace Switching and select 3D Modeling. Find.
2. Click Solid tab > Solid panel > Extrude. Find.
3. Select the objects or edge subobjects to extrude.
4. Specify the height.