How do you wire a basic Sonoff?

How do you wire a basic Sonoff?

Power up the Sonoff device and connect the appliance that you want to control (in my case, it’s a desktop lamp) Press and hold the Sonoff button for 5 seconds, so the LED green starts blinking. Go to the app and press the next button. Enter your network credentials and choose a name for your device.

How do you hook up a Sonoff wall switch?

Enter quick pairing mode by pressing and holding the “ON” button on the remote controller for 5s (light strip flashes). Exit the mode if not paired within 3mins. Press and hold it 5s again to enter (light strip flashes). Enter pairing mode during the first use after powering on (Indicated by a voice prompt);

How can I make my existing lights smarter?

A: Simple! With most devices, you select a smart light switch, remove your old switch and connect the new device to your smartphone. The device can typically connect over Wi-Fi. With others, you can snap over your existing light switch for ease of use.

Can Sonoff work with home assistant?

Yes, Sonoff devices do work with Home Assistant. The first approach is to setup the Sonoff LAN Integration in Home Assistant and the second approach is to flash your Sonoff device with Tasmota firmware.

How do I connect my Smart Switch to WiFi?

WiFi Smart Switch Instruction Manual

1. Press ADD DEVICE and select SWITCH to set up a new.
2. Mount the WiFi switch into a wall, the blue led indicator will flash quickly. If the light does not flash quickly, press and hold the button for 6 seconds the light will then flash quickly.
3. Connection cycle will Appear.
4. 100%.

Do all 3 way switches have a neutral wire?

The most common wiring requirements of any hardwired automated 3-way light switch is a neutral wire and a traveler. Yes, there are a few… (read very, very, very few) switches that don’t require a neutral, but those will limit you to incandescent only.

Can I use ground as neutral for Smart Switch?

Can you use ground as a neutral for smart switches? While connecting the neutral of a smart switch to ground might work, never do this! The reason it will work is that ground is often connected to neutral in the electrical panel, meaning it will be at a very similar voltage allowing current to flow from hot to ground.

What can a SONOFF minir2 smart switch be used for?

SONOFF MINIR2 is a Wi-Fi DIY smart switch used for different kinds of switch box & 3 different modes to suit different switches or sensors

What is surge testing requirement for SONOFF minir2?

The surge testing requirement for the CE certification is 1kv. The external antenna of MINIR2 is moved to the interior, improving the use performance and safety. It is recommended that the frontside of MINIR2 is installed outside during installation and do not install it in the metal junction box.

Can you install a SONOFF wall switch without a neutral wire?

It’s possible to install a sonoff wall switch without an existing neutral…in fact you will need a wall switch and sonof basic and create a scenario to be able to use them both at same time. All switch light are using a hot wire coming from the light enclosure and another wire to send hot line to the light.

How do I Pair my SONOFF remote controller?

Press the manual switch 3 times repeatedly at an interval of every 1s (the bulb changes from dim to bright repeatedly). Enter quick pairing mode by pressing and holding the “ON” button on the remote controller for 5s (light strip flashes). Exit the mode if not paired within 3mins.