Contents
How does communication take place between XBee modules?
There are two types of data transmission involved in XBee communication: Wireless communication takes place between 2 or more XBee modules. In order to wirelessly communicate they must be part of the same network and use the same radio frequency. Modules that meet these requirements, communicate through wireless communication.
Why are XBee modules not compatible with Zigbee Light Link?
The last information got confirmed for the time being the XBee modules wont be able to be used for Zigbee Light Link. The reason for this is that the current firmware doesn’t support inter pan commands. It is how ever possible if you would write your own firmware but the source code of the current one is available.
What is the destination address of an XBee?
An XBee’s destination address specifies the source address of the module it can send data to. It can be specified by a universal unique address of 64-bits. This address printed can be found on the back of the module. Alternatively, it may be specified with a 16-bit address that is unique within a network, or with text.
How do I connect my XBee to my computer?
Plug your first XBee into an Explorer module, which is a an extra board that provides access to the pins on the XBee. Connect this via USB to your computer’s USB port. Open the XCTU software and click “Discover devices.” We next have to select and configure the port. First select the port the module is connected to.
Is the XBee Series 1 compatible with Zigbee?
As the popularity of the XBee module has grown massively, there are now several modules types available in the market. The XBee Series 1, is the most popular by far. However, XBee Series 1 (S1) cannot communicate with ZigBee devices available in the market.
How to communicate between multiple microcontrollers in a system?
I’d like to start implementing a system consisting of N microcontrollers (N >= 2 MCUs), but I would like to know the possibilities to let them communicate one with the other. Ideally, (N-1) microcontrollers are placed inside the house acting as clients, while the last (the “server”) one is connected to a PC via USB.