Contents
How does MSP430 microcontroller work for UART communication?
So this is how we can transmit and receive data through UART module of MSP430G2553 microcontroller which is available on MSP430G2 launchPad. There are many wireless communication modules which works on UART communication like HC-05 Bluetooth module, GSM module.
Which is the transmitter wire for MSP430 LaunchPad?
Transmitter wire is used to send data sequentially to other UART microcontroller or device. UART communication pins of MSP430G2 launchPad are shown in figure. Pin number three is transmission pin and pin number 4 is a receiver pin. Two types of serial communications are used one is synchronous and other one Asynchronous .
What’s the difference between RS-232 and UART?
It is important to distinguish the difference between the terms UART and RS-232. The UART is the peripheral on the microcontroller which can send and receive serial data asynchronously, while RS-232 is a signalling standard.
What kind of interface does the MSP430 support?
The MSP430 provides a module called the USCI (universal serial communications interface) which supports multiple types of serial interfaces. There are two variants of the USCI module each of which support specific interfaces: A given device may have none, one or more of each of these modules, depending on its implementation.
What’s the baud rate on a MSP430 LaunchPad?
MSP430 Launchpad UART The MSP430G2553 or any MSP430 in the socket is connected to the computer via USB using a combination of MSP430 and a TUSB3410 or similar USB device. In many Launchpads, these devices limit the baud rate to 9600 baud. Note that this isn’t a limitation of the MSP430 UART interface itself.
How is the msp430g2553 connected to the computer?
The MSP430G2553 or any MSP430 in the socket is connected to the computer via USB using a combination of MSP430 and a TUSB3410 or similar USB device. In many Launchpads, these devices limit the baud rate to 9600 baud. Note that this isn’t a limitation of the MSP430 UART interface itself.
How many bits does a UART receiver use?
Although some UART receivers can use a different number of bits, only 8 or 8 bits are supported by the MSP430. After the data bits stop bits are sent along with an optional parity bit. MSP430 families contain different peripherals capable of UART communications. Among these are USCI, USART and eUSCI modules.