Contents
High Frequency (HF) Passive RFID Tags – maximum read distance of 1.5 meters (4 foot 11 inches) – usually under 1 meter (3 feet) and you can use a single or multi port reader plus custom antennas to extend the read range to longer tag read distances or a wider RFID read zone.
What is the range of RFID antenna?
Passive low-frequency (LF) and high-frequency (HF) tags can be read from a distance of up to 3 feet (0.9 meter), while passive ultrahigh-frequency (UHF) RFID transponders can typically be read from 10 to 20 feet (3 to 6 meters) away.
How small can RFID tags be?
Hitachi Chemical sells an EPC Gen 2 passive ultrahigh-frequency (UHF) RFID tag that is one of the smallest tags on the market, measuring just 2.5 millimeters (0.098 inch) square and 0.3 millimeter (0.012 inch) thick.
Are RFID tags expensive?
Generally speaking, active tags are $25 and up. Active tags with special protective housing, extra-long battery life or sensors can run $100 or more. A passive 96-bit EPC inlay (chip and antenna mounted on a substrate) costs from 7 to 15 U.S. cents.
up to 100 m.
Active RFID systems typically operate in the ultra-high frequency (UHF) band and offer a range of up to 100 m. In general, active tags are used on large objects, such as rail cars, big reusable containers, and other assets that need to be tracked over long distances.
What makes a RFID tag have a longer read range?
As a general rule of thumb, small tags will have shorter read ranges, and large tags will have longer read ranges. In order to get the best range from any RFID tag, make sure that the tag is fully facing the antenna and pay particular attention to tag orientation when using linearly polarized antennas.
Are there antenna systems for passive RFID tags?
Antenna systems for passive radio-frequency identification (RFID) tags. The antenna systems have a very small form factor with good power harvesting and good performance in proximity to other antennas.
What kind of antenna do I need to read tags?
The following six tips walk you through key hardware specifications that will assist you in determining your optimum setup. If you need more read range, use higher gain antennas. If you need less read range, use lower gain antennas. If you need to read tags up close, use very low gain proximity antennas.
Which is better a high or low gain RFID antenna?
In short, the higher the gain, the higher the range of the antenna, and vice-versa. Additionally, lower gain antennas are smaller in size than high gain antennas; so, if your application has size restrictions in terms of the antenna’s dimensions, you may want to experiment with a lower gain RFID antenna.