Contents
How is the input current of a DC converter determined?
The factors that determine input current are output power, input voltage, and converter efficiency. Power = Voltage x Current. Efficiency = Power Out / Power In. If you know the converter’s efficiency at the voltage and power it is operating at then calculating the input current is trivial. But…
What do you need to know about DC to DC converters?
Basically, a dc-dc converter is an electronic circuit that is used to step up (boost converter) or step down (Buck converter) the dc voltage to get the desired voltage. DC DC converter topologies. DC to DC Converters can be divided into two categories: The isolated Converters and; The non-isolated Converters
What is a step down DC to DC converter?
A buck converter ( step-down converter) is a DC-to-DC power converter that steps down voltage (while stepping up current) from its input (supply) to its output (load).
What kind of DC-DC converter is quiet for EMI?
Their newer Silent Switcher 2 low-EMI converters incorporate both the input and output capacitors and their associated loops, within the IC package. Finally, their “µModule” series of converters also incorporate the output inductor, as well. While more expensive, these are all particularly quiet for EMI.
How is the switch current related to output current in a?
The device outputs 12V, but the controller gets very hot (way beyond spec of 70C) even at 0.5A at the output. The device says it has a maximum switch current of 1.5A, and I’ve incorrectly thought this is the maximum output current rating.
How does a DC to DC converter work?
Switching power supplies are DC-to-DC converters. Even those that have an AC input create a DC bus, using a rectifier circuit before implementing a switcher. You will see switchers replacing just the regulator in our earlier circuit working off a DC bus voltage that has already been stepped down by a transformer.
I have tied the Drive and Switch collector to form a darlington pair. The device outputs 12V, but the controller gets very hot (way beyond spec of 70C) even at 0.5A at the output. The device says it has a maximum switch current of 1.5A, and I’ve incorrectly thought this is the maximum output current rating.