Contents
How many VLANs can be tagged on a single interface port?
4 Answers. Often, a given device has a hardware limit of e.g. 512 VLANs. With 802.1q tagging, the absolute limit is 4,094 (the tag is 12 bit in size and VIDs 0 and 4,095 are reserved). With 801.1aq tagging, the tag (SPBV) is expanded to 24 bit, so 16 million VIDs are possible.
Can a PC be on multiple VLANs?
Re: Making a PC a member of more than one VLAN “If you need to communicate between your two virtual LANs you need to link them with a router, either one with physically separate interfaces, or one that supports VLANs – this router can also be a “route switch”, or layer 3 switch.”
Can you have multiple VLANs on port 4 / 38?
For port 4/38, yes – it will be in trunk mode. Vlans 699,712,751,787,987,3890 will be allowed on this trunk. You can verify if they are forwarding, with the show int trunk command.
Is it possible to configure multiple VLAN’s on a single device?
Access ports are also known as “untagged” ports, since an access port will strip the Vlan tag from the packet. Some non-switch network devices DO allow trunk mode on their interfaces: For instance, server network cards will often allow trunk connections for virtual machines to communicate over multiple Vlans using a single physical interface.
Can a D-Link switch pass traffic to multiple VLANs?
This will make that interface a trunk port which will carry traffic tagged for any allowed VLAN. By default, a trunk port will pass traffic for any VLAN configured on the device. Then connect the FastEthernet0/3/0 port to a port on your D-Link switch.
Can a file server have access to both VLANs?
In the proposed solution it said the file server will have access to both VLANs, but in the conclusion, it said only client A can access to that file server. Port 45 cannot communicate to either port 47 or 48 unless I set port 45 PVID to 10 or 20. But it cannot access to both at the same time.