How thick do cabinet doors need to be for soft close hinges?

How thick do cabinet doors need to be for soft close hinges?

Concealed hinges can go in face-frame or frameless cabinets and on any door type—including full overlay, partial overlay, or inset—as long as the doors are at least ½ inch thick.

What size hinge do I need for cabinet?

The most common are ¼”, 3/8” and ½”. There is also a variable hinge available, but it attaches to the surface of the cabinet, not the edge of the cabinet opening as shown in the diagram. Consequently, it can be used on various sizes of overlay.

Can you put soft close hinges on old cabinets?

It is possible to convert a cabinet with a soft close to stop the loud noises associated with opening and shutting your cabinets. With an inset cabinet door, you will not need the spacer in the conversion kit, but if you have an overlay cabinet door you will need this spacer to keep the door from hitting the adapter.

Can you put new hinges on old cabinets?

Unless you’re going to replace the hinges with the exact same type, you will need to cover the old holes and drill new ones. This job is best accomplished when you’re refinishing the cabinet. If the new hinges are close enough in style to the originals, you’ll want to use epoxy wood filler.

Do you need 2 soft close hinges per door?

In general one soft hinge is sufficient on majority of the door and closing habits. However, if you close the door normally, or even with slightly harder manner than usual, one and two soft hinges would give you identical results. So, save your money.

Can I change my cabinet hinges to hidden?

Many older kitchens out there have exposed hinges, where you can see the hinge mounted to the cabinet frame. By swapping out that hinge for an updated, hidden hinge, the transformation can really take a space from dated to modern, just like that. Having hidden hinges gives you the freedom to change hardware on a whim.

What’s the difference between self close and soft close hinges?

Self-close means when you close the door and it gets within 2″ of closing, it will pull itself close because of the spring in the hinge itself. That way, if your hands are full you don’t have to use much force to get the cabinets closed.

What kind of hinges do I need for my Kitchen cabinets?

Pivot Hinge. Pivot hinges are great on cabinets that have inset doors, and you don’t want any of the hinges to be visible. They are commonly found on smaller cabinets or on freestanding pieces of furniture with doors, such as TV units. These work with a hinge at the base of the cabinet door, and one at the very top.

How to install a soft close cabinet door?

How To Install Soft Close Hinges 1 Step 1: Remove Old Cabinet Door & Hinges 2 Step 2: Drill A 35mm Hole (1 3/8″) 3 Step 3: Install Hinge Into Cabinet Door 4 Step 4: Install Clip-On Mounting Plate 5 Step 5: Clip Hinges Into Mounting Plates 6 Step 6: Test Out Your New Soft Close Hinges! More

What kind of hinges are used on lockers?

A self-closing hinge can be hydraulic or spring-loaded. Either way, these types of hinges use the weight of the door to close themselves. They are common on lockers, where a wall of doors that had been left open might look unsightly or present a hazard.