Contents
How to connect L2TP client to CISCO ISR 4321 router?
I am trying to connect an L2TP client to Cisco ISR 4321 router (I have previously done this successfully with 29xx series). The client connects, the virtual interface comes up, IP address gets assigned and a route for the assigned ip gets added to the routing table just like I expected it to.
How to troubleshoot a Cisco VPN or L2L connection?
As a result, this document provides a checklist of common procedures to try before you begin to troubleshoot a connection and call Cisco Technical Support.
Is there a way to troubleshoot an IPSec VPN?
This document contains the most common solutions to IPsec VPN problems. These solutions come directly from service requests that the Cisco Technical Support have solved. Many of these solutions can be implemented prior to the in-depth troubleshooting of an IPsec VPN connection.
What is the error message for remote access IPsec?
Error:- %PIX|ASA-4-402119: IPSEC: Received a protocol packet (SPI=spi, sequence number= seq_num) from remote_IP (username) to local_IP that failed anti-replay checking. Error message: Command rejected: delete crypto connection between VLAN XXXX and XXXX, first.
How does the RADIUS server authenticate a tunnel?
The RADIUS server looks up the tunnel attributes for the user’s domain (for example, cisco.com) and passes the tunnel attributes to the LAC. Based on these attributes, the LAC initiates a tunnel to the L2TP Network Server (LNS). Once the tunnel is established, the LNS authenticates the end user using its own RADIUS server.
How to configure layer 2 tunnel protocol authentication?
Click on the Group Setup button in the left bar. Select the Group the user belongs to and click Edit Settings. In the section for Internet Engineering Task Force (IETF) RADIUS Attributes, select Service-type (attribute 6) = Framed and Framed-Protocol (attribute 7)=PPP from the drop-down menu.
Do you need appxk9 for Cisco 4000 series ISR?
In Cisco 4000 Series ISR, although L2TPv2 sessions comes up without appxk9, you need the appxk9 license for the traffic to go through the sessions. You also need the appxk9 license to apply the QoS policies to the L2TPv2 sessions.