How to create a silkscreen on Altium Designer?

How to create a silkscreen on Altium Designer?

Altium Designer has Top Overlay and Bottom Overlay layers that are used for silkscreen. Any primitives on these layers will eventually be applied to one of the external sides of the board during production. Let’s create a silkscreen for the PCB. Open the View Configuration panel. Make the Top Layer and Top Overlay layers visible.

Where are the designators on a silkscreen?

Fig. 6 – Bottom Overlay layer is active; the Bottom Layer is dimmed. Designators for CN1, CN2, U1, U5, U6, and U7 are placed.

How to move and place text in silkscreen?

Activate Texts in the Selection Filter of the Properties panel. You can move and place designators, but it is recommended to decrease their size. Select all Designators then set the Text Height to 1mm in the Properties panel. Also, define the Stroke Width as 0.2mm in the Font Type region.

How to create a silkscreen for a PCB?

Let’s create a silkscreen for the PCB. Open the View Configuration panel. Make the Top Layer and Top Overlay layers visible. When setting up the Top Layer silkscreen, it is recommended that you use this configuration to prevent silkscreen objects from reaching the component pads.

What do you need to know about silkscreen printing?

All drawings and designations on the PCB are realized with silkscreen printing. With the help of silkscreen, you can mark each component: its designator, borders, part number, and first pin position.

How does the via style rule work in Altium?

The Routing Via Style design rule defines the X-Y properties of the via. The layers that each via spans in the Z-plane are configured in the Via Types tab of the Layer Stack Manager.

When to use distance check in Altium Designer?

This check ensures that the distance is greater or equal with the value specified by the user (as shown below). {Note} The Video was created with Altium Designer Release Winter 09. The Rule was modified for the following releases so that not all information from the Video are up to date.

What does user choice mean in Altium Designer 21?

User Choice means the last-used via settings, or template chosen. To change the current User Choice values, press Shift+V during interactive routing when there is a via floating on the cursor. The Choose Via Sizes dialog will open, select a Via Template or enter the required values (within the Min/Max rule range).

Can a company logo be used in Altium Designer?

Sure this can be achieved through simple text on the silkscreen layer, but more often than not, the company’s logo is a far more eye-catching and effective alternative. Catering for this requirement, Altium Designer’s PCB Editor supports several methods for adding graphical images to a PCB design document.

Is it possible to add images to layers in Altium?

Anyways, the Altium documentation has a pretty good workup on how to add images to various layers. Also, it’s supposedly possible to paste various types of content (images, MS Word charts, etc…) directly into a PCB, but I was not able to get that functionality to work for me.

Is it possible to invert colors in Altium?

I wanted it to behave like the Polyogn Pour, or even better, like the inverted, were the lines (or a fill) were on top of some text, the text wil invert the colors. Is this even possible? Tips about cool artwork things to do in Altium are welcomed as well.