Contents
How to get out of Grub rescue mode in Ubuntu?
Once the Ubuntu installer boots, open a command line by pressing Ctlr+Alt+T then type sudo grub-install /dev/sda Insert your Ubuntu CD, reboot your computer and set it to boot from CD in the BIOS and boot into a live session.
What happens when Grub boot loader is corrupted?
A corrupted Grub boot loader makes a CentOS/RHEL system unable to boot and transfer the control further to Linux kernel. The Grub boot loader stage one is installed on the first 448 bytes at the beginning of every hard disk, in an area typically known as the Master Boot Record (MBR).
Executing the normal command brought me back to the grub menu. I found this command (and others) by pressing Tab in the grub CLI. Type exit and then press your Enter key twice. Or press Esc. Shift + Esc: What worked for me was holding down Shift and pressing Esc several times.
How to get to Grub from the command prompt?
Type normal, hit Enter, and then tap ESC until the menu is displayed. Hitting ESC at this point won’t drop you to the grub command prompt (so don’t worry about hitting ESC too many times). share|improve this answer.
How to fix boot grub in Ubuntu 10.10?
Since you can boot manually, the simplest fix is to manually boot and reinstall the bootloader in the MBR so that it has the correct reference to your partition. The way to do that is: This assumes you boot from /dev/sda (most cases, but if not, replace it with the correct drive).
How to rescue, repair and reinstall Grub boot loader?
Select Yes and press [Enter] key to continue. 13. Next, you will be provided with Rescue operations menu. Here, select the option to Reinstall the GRUB boot loader and press [enter] key to continue. 14. On the next screen, type your machine disk device where the GRUB will be installed and press [Enter] to continue, as shown in the below image.
Why does grub not boot from the external drive?
Grub won’t let you do much if it cannot load the modules, so, without the external plugged in you cannot boot anything. What you should have done is to leave the Windows bootloader on the internal drive, and installed Grub to the external. Then whenever you plug in the external, just override at startup to boot from the external.