Contents
How to get the state of a GPIO pin?
How do I get the state of a pin and store it in a variable in a script? You could try something like this if you are wired to pin 0 (as referred to in this site https://projects.drogon.net/raspberry-pi/wiringpi/pins/ ), which will read the pin once, set the variable “b”, echo to console and exit.
How are GPIO pins defined on a Raspberry Pi?
But interested to know if GPIO states are consistent between board and/or firmware revisions. That is easy to answer. The power on state is defined in BCM2835 ARM Peripherals page 102. Basically all GPIO are in INPUT mode, GPIO 0-8 have pull-ups to 3V3 enabled, GPIO 9-27 have pull-downs to 0V enabled.
What does GPIO hold dis do for gipio?
But it seems I have resolved the issue by adding gpio_hold_dis (PIN); when going out of sleep (even in light sleep). When not doing this, the pin would sometimes not be held high anymore when going back to light sleep. Sign up for free to join this conversation on GitHub .
When to set Pin 17 high or low on gipio?
When setting pin 17 high, the state is sometimes held before going into light sleep, other times it is not. It seems quite random. Anyone found a solution for this? @ppotter100 Have you tried using pin 25 or pin 26?
How to find the GPIO channel on a Raspberry Pi?
Where channel is the channel number based on the numbering system you specified when you called setmode. To read the value of an input channel, call: where channel is the channel number as used in setup. It will return a value of 0, GPIO.LOW, or False (all are equivalent) if it is low and 1, GPIO.HIGH, or True if it was at a high level.
Can You import multiple modules into gpiozero library?
You can import multiple modules with one import statement, e.g. The GPiozero library uses Broadcom (BCM) pin numbering rather than physical pin numbers. That should not normally be a problem.
Is there a Python program to control Raspberry Pi GPIO?
Raspberry-gpio-python [2] or RPi.GPIO, is a Python module to control the GPIO interface on the Raspberry Pi. It was developed by Ben Croston and released under an MIT free software license. The project Wiki [3] has documentation including example programs.