Contents
Is FX send and aux send the same?
Aux sends are sometimes labeled with different names such as “effects send,” “FX send,” MON (short for “monitor”) or even “foldback,” but they all work the same way: They serve as a secondary output from a channel that routes the signal to a place other than the main left and right speakers.
What can aux sends on a mixer be used for?
An “Aux Send” is a type of output used on most live sound and recording mixers. It allows you to create an “auxiliary” mix in which you have individual level control over each input channel on your mixer to your “Aux Send” output. This allows you to add those effects to an output or channel on your mixer.
What is aux return on a mixer?
An aux input used for bringing a signal back into a mixer. Aux returns are often used to bring the output of external effects, such as echo, delay, and reverb into a console.
What FX sends?
An FX send is a channel used to isolate a group of effects for discretional use on multiple tracks. For example, maybe you want s very clean sounding verse, and then for the chorus you want a particular set of effects (compression, distortion, and a phaser, maybe) on two or three of the channels.
What is an aux channel used for?
Most sound desks include one or more auxiliary channels (often referred to as aux channels for short). This feature allows you to send a secondary feed of an input channel’s audio signal to another destination, independent of the channel’s main output.
What is an aux bus on a mixer?
In a mixer, an aux bus is signal path that is auxiliary to the main audio path of the mixer. Aux buses are often used for aux sends, and aux returns but can sometimes simply be secondary paths for submixing.
Is aux out on stereo?
Aux inputs are always 3.5mm TRS unbalanced stereo. Auxiliary inputs are often found in automobile stereo systems, stereo receivers; audio amplifiers; active loudspeakers, and even clock radios.
How does an aux send work in a mixer?
Sending signals to some sort of effects processor (reverb, delay, compressor, etc.). Typically, the output of the effects processor will be brought back to a stereo or aux return on the mixer. This allows you to add those effects to an output or channel on your mixer. Sending only certain channels into a recording interface.
How does an FX send on a mixer work?
Suppose you want to send the acoustic guitar track through a compressor to smooth out the levels. Another strategy is to use the FX send for that channel. It typically uses a special 1/4″ jack and cable (called TRS), which splits into two cables with normal 1/4″ jacks.
What can an aux send do for a headphone?
In Post-fader mode, any adjustments made on that channel fader will affect the signal going to your Aux Send. Aux Sends have many uses, including: Creating monitor or headphone mixes so that performers are able to hear themselves during a live performance or recording.
What’s the difference between aux send and post fader?
There are generally two ways to use an Aux Send: Pre-fader or Post-fader. When using in Pre-fader mode, a channel’s aux level will only be affected by the Aux Send knob, but not the channel’s fader. In Post-fader mode, any adjustments made on that channel fader will affect the signal going to your Aux Send. Aux Sends have…