Contents
Is LTE-M Cat M1?
LTE-M was first introduced as LTE Cat M1 in the 3GPP Release 13 standard that also defined Narrowband IoT (NB‑IoT or LTE Cat NB1) – both are LPWA technologies in the licensed spectrum. With 3GPP Release 14, the LTE Cat M2 standard has been set.
Is Cat M and LTE-M the same?
LTE Cat M (also known as LTE-M) is a low power wide area (LPWA) technology designed to support “Massive IoT”, i.e. billions of IoT devices, with cellular technologies. Today Cat M is mostly referring to Cat M1, as Cat M2 adoption will take a few more years.
Is LTE-M cellular?
LTE-M (LTE-MTC low power wide area (LPWA)) is a new cellular radio access technology specified by 3GPP in Releases 13 to 15 to address the fast-expanding market for low power wide area connectivity.
What is LTE Cat M1 NB1?
Cat M1 defines a 1.4 MHz channel size and throughput of about 375 kbps uplink and 300 kbps downlink; Cat NB1 defines a very small channel size of 200 kHz and 10s of kbps of throughput. The higher Cat M1 throughput allows devices to get to sleep faster between transmissions, thus saving power.
What is cat M1 frequency?
On the other hand, Cat-M1 operates at 1.4 MHz bandwidth with higher device complexity/cost than NB-IoT. The wider bandwidth allows Cat-M1 to achieve greater data rates (up to 1 Mbps), lower latency and more accurate device positioning capabilities. Cat-M1 supports voice calls and connected mode mobility.
Is LTE-M the same as 4G?
In fact, LTE-M is the industry abbreviation for the LTE (Long Term Evolution, or simply 4G) Category M1 standard that was published by 3GPP in 2016 (Release 13).
What are the average speeds a customer can expect with LTE Cat M1?
LTE-M in the half duplex mode that is currently available can reach around 300 kbps in downlink and 380 kbps in uplink. On the field, average data rates of 100 to 150 kbps is reached in both directions with lower figures of a few Kbps when extended coverage features are in use.
Is LTE Cat M1 5G?
Cat-M1 and NB-IoT are considered future-proof and are viewed as 5G technologies. They can efficiently co-exist with 5G NR in the same spectrum and already fulfill all 5G massive MTC requirements.
What do I need to know about LTE Cat M1?
Cellular network providers responded by developing LTE Cat M1. The service uses a tiny sliver of bandwidth on the secure, reliable LTE network, which is already available virtually everywhere.
Which is LTE Cat M1 / NB-IoT shield modem?
At the heart of the LTE Cat M1/NB-IoT shield is a u-blox SARA-R410M-02B LTE Cat M1/NB-IoT modem. Cat M1 (Category M1) and NB-IoT (Narrowband IoT) are both Low Power Wide Area Network (LPWAN) technologies that are designed to provide cellular communication to small IoT devices.
When did the Verizon Cat M1 come out?
The specification for eMTC (LTE Cat-M1) was frozen in 3GPP Release 13 (LTE Advanced Pro), in June 2016.Then Verizon, the U.S wireless operator, is about to release the Cat M1 technology along with multiple partners such as Sequans, U-Blox, Altair, Nokia, Ericsson and Gemalto.
Which is the new LTE category CAT 0?
Defined as the new LTE category 0 (Cat 0), it required support of the full LTE carrier bandwidth to receive the LTE control information. As part of the enhanced MTC (eMTC) activities, Release 13 specified bandwidth-reduced low-complexity (BL) UE.