Contents
Is rated power the same as RMS?
Typically, a unit’s peak power handling is double the RMS power handling, which basically means that the above products are actually rated the same: 150 W peak/75 W RMS. Therefore, speaker power ratings refer to the amount of power your speakers can handle from an amplifier.
Should AMP match RMS or peak?
Do not match the speaker’s RMS power rating to an amplifier’s Max/Peak power output. For example: If your speakers are rated to handle 50 Watts RMS each, and you select an amplifier that will deliver 125 watts RMS per speaker, you will likely apply too much power for the speaker to handle.
What’s the difference between RMS and peak wattage?
This misunderstanding is caused by the difference between peak wattage and RMS wattage. A more powerful 200-watt aftermarket stereo, for example, probably gets its power from an amp chip rated at 50 watts peak by 4 channels, and its real world RMS rating is probably in the neighborhood of 15-18 watts per channel.
What does RMS stand for on car speakers?
Referred to as continuous power handling, RMS simply stands for the Root Mean Square wattage. The RMS wattage rating on your car speakers represents the amount or level of power that it can handle on a regular basis and is in fact recommended by the manufacturer.
Do you have to match peak and RMS ratings?
As a consumer, you should be keen not to compare Peak and RMS ratings when matching your equipment. Instead, you should match either two Peak values or two different RMS values. If you get the values to match, you will be able to get the best performance from each component in your audio system.
What does peak power mean for car speakers?
First off, let’s shed some light on peak power. For car speakers, the peak power handling value tells you the maximum power levels that your speaker is capable of comfortably utilizing in short bursts.