Contents
Should resistor be on anode or cathode?
Placing the resistor on the positive (anode) side of the resistor will have no differing effects from placing the resistor on the negative (cathode) side of the LED. So don’t sweat it, just pick a side!
Does it matter what side a resistor is on?
In reality, no, it doesn’t matter which side the resistor is on. The two components together make up a Series Circuit, and current is the same at all points, but voltage changes.
Does resistor go on positive or negative?
When you put an LED in a circuit, you need to put a resistor in series with it to limit the current that flows through the LED. Resistors don’t have positive and negative sides — you can hook them up in either direction and they work just the same.
Can a resistor be negative?
It’s not possible to get a negative resistance with purely passive components. A normal (positive) resistor puts out heat to the surroundings – voltage times current gives us the power dissipated. A negative resistor would need to suck in heat and turn it to electrical energy.
Can a resistor be connected to anode or cathode?
No there is not any difference usually a resistor is connected in series with the LED to limit the current. Whether it is connected to anode or to cathode it doesn’t make any difference. Resistor is just connected in ‘ series with the LED ‘.
What happens when we use one resistor on an RGB LED?
Now, let’s discuss what happens when we use a single resistor on an RGB LED. We can assume that our power source is 5V, then the typical forward voltage of the red LED is 2V, while the green and the blue LEDs would be around 4V. As indicated in the diagram, the LEDs are obviously connected in parallel, a crucial aspect to this problem.
In order to get the color that we want from an RGB LED, we need to forward bias and control the intensity of each internal LED. In an RGB LED package, the LEDs inside almost always share either a common anode or cathode.
Can a single resistor be used with multiple LEDs?
While not the overriding problem with RGB LEDs, your single resistor has another issue. When you have a single resistor and a single LED, you can calculate the maximum current that will go through that resistor. But with a single resistor and multiple LEDs, that resistor now needs to channel the current that flows through ALL of the LEDs.