What are aux sends used for on a mixer?
An “Aux Send” is a type of output used on most live sound and recording mixers. The aux sends on a mixer work independently of the main mix output and give you the ability to route multiple input channels to a single output while leaving out the channels you don’t want to hear.
Is aux send mono or stereo?
Each aux output is a mono send. If you want to process a stereo input channel, the aux sends are both derived mono sums, so that won’t work in stereo either. And, if you want to process the input channels individually in mono, plugging up both sides of both processors is pointless.
What does an aux return do in a mixing console?
This allows effect to be added to an audio source or channel within the mixing console. an Aux Return is a level-control-only input that generally feeds directly into the Mix Bus (rather than using up a fully-featured channel), and has no aux send from it (automatically preventing feedback through the device).
What are the two parts of an AUX channel?
Aux, short for auxiliary, is a bus used to create external, precise mixing. Aux channels do not have instruments/sounds on them. Sometimes they are referred to as effect channels, as they are merely there to be routed to. Aux channels can be broken down into two parts: Sends and Returns.
Do you need channel EQ for AUX Out?
If you were to route channels to external effects on the aux out you would have to return them to an unused stereo channel. On a big deck that may not be a problem but on a tiny mixer you may not have any input channels to spare. And you probably dont need channel EQ on the returned effects.
What are aux, sends, and returns in Ableton?
Aux channels can be broken down into two parts: Sends and Returns. Auxes are useful because they allow for the original sound to run parallel with the processed sound. A mixer chooses how much of a particular signal he/she wants to send to the Aux channel. In Ableton, two Aux channels (Titled A and B) are created by default.