Contents
- 1 What are standard wrench sizes?
- 2 What is a size 15 wrench?
- 3 What is the next size down from a 5 8?
- 4 How do I know what size wrench I need?
- 5 What’s the next size down from 5 8?
- 6 What is equivalent to a 15 mm socket?
- 7 Which is the correct size for a wrench?
- 8 Can a metric wrench be converted to a SAE wrench?
What are standard wrench sizes?
Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
What is a size 15 wrench?
American Wrench Size Chart
| Size/SAE in inches | Size in mm (metric) | Inches |
|---|---|---|
| 15mm | 0.591 | |
| 19/32″ | 0.594 | |
| 5/8″ | 0.625 | |
| 16mm | 0.63 |
What are standard socket sizes?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
What are the most common sizes of wrenches?
Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.
What is the next size down from a 5 8?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ |
How do I know what size wrench I need?
Rule of thumb is take diameter of thread multiplied x 1.5 = wrench size. The exception is heavy hex nuts as they are structural and made larger.
Is 24mm and 15 16 the same?
23mm = 29/32 inch. 24mm = just over 15/16 inch.
What is equivalent to a 15 mm wrench?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 14mm | 0.551 | |
| 9/16″ | 0.563 | |
| 15mm | 0.591 | |
| 19/32″ | 0.594 |
What’s the next size down from 5 8?
What is equivalent to a 15 mm socket?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 9/16″ | 0.563 | |
| 15mm | 0.591 | |
| 19/32″ | 0.594 | |
| 5/8″ | 0.625 |
What is smaller than a 7/16 wrench?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
| 7/16″ | 16mm | 5/8″ |
Why do wrench sets Skip 16mm?
The reason is that neither 16 or 18 are used at all in anything metric that I have found. On Toyota a set NEEDS to include 10, 12, 14, 17, and 19 and if you have a later one an occasional 8. German vehicles use a lot of 11,13, and 15.
Which is the correct size for a wrench?
Wrench sizes are commonly displayed in SAE, which is a standard size or in Metric size. To make the chart as useful as possible, we will present you with both variations and therefore assist you in choosing the wrench you need. Keep in mind that the NOTE section of the table is used to explain the ‘’close enough’’ size between SAE and metrics.
Can a metric wrench be converted to a SAE wrench?
Chances are that there will be two eligible wrench sizes that you can use (1 SAE & 1 MM). If you’re looking to find the right wrench for a metric bolt, the conversion is very much the same.
How big is a 19mm American wrench?
American Wrench Size Chart Size/SAE in inches Size in mm (metric) Inches Notes 19mm 0.748 3/4 inches SAE size is simillar to 19mm, 3/4″ 0.75 25/32″ 0.781 20mm 0.787
How big is a SAE bolt and Wrench?
Bolt and Wrench Sizes Diameter of a bolt (inches) SAE wrench size in inches Metric wrench size in mm 1-1/4 1-7/8 48 1-3/8 2-1/16 53 1-1/2 2-1/4 58 1-5/8 2-7/16 62