Contents
What are the differences between open collector output and totem pole output?
Totem pole operates at high speed….Difference between of Totem Pole and Open Collector :
| Totem Pole | Open Collector |
|---|---|
| Output stage of totem pole circuit consists of pull-up transistor, diode resistor and a pull down transistor. | Output stage of Open collector consists of only pull down transistor. |
What is the advantage of totem-pole TTL over open collector TTL?
The major advantage of using a totem-pole connection is that, it offers low-output impedance in both the HIGH and LOW output states. 3.1 Open Collector output: In the open collector TTL gate, the output stage does not have the active pull-up transistor i.e. Q3 and the output is taken at the collector of transistor Q4.
Is TTL an open collector?
Open-collector TTL gates can be tied together, forming a wired-AND connection, Figure 146. The value at Y is the logical AND of the outputs Y1 and Y2.
What is totem pole output in TTL?
Totem Pole Output Totem Pole means the addition of an active pull up the circuit in the output of the Gate which results in a reduction of propagation delay. Totem Pole Output TTL. Logic operation is the same as the open collector output.
What is meant by open collector output?
An open-drain or open-collector output pin is driven by a single transistor, which pulls the pin to only one voltage (generally, to ground). When the output device is off, the pin is left floating (open, or hi-z).
What’s the meaning of a totem-pole?
Totem poles are monuments created by First Nations of the Pacific Northwest to represent and commemorate ancestry, histories, people, or events. Most totem poles display beings, or crest animals, marking a family’s lineage and validating the powerful rights and privileges that the family held.
Why is the TTL output circuitry called totem pole?
The output circuitry of this particular gate is commonly referred to as “totem-pole,” because the two output transistors are stacked one above the other like figures on a totem pole. TTL gates equipped with totem-pole output circuitry are able to both source and sink load current.
What’s the difference between totem pole and open collector?
Totem Pole output drives the output high and low. Open collector will only pull the output low; it does not drive the output high, only releases the output to float.
Which is output stage of totem pole circuit?
Output stage of totem pole circuit consists of pull-up transistor, diode resistor and a pull down transistor. Output stage of Open collector consists of only pull down transistor.
What is the output stage of open collector?
Output stage of Open collector consists of only pull down transistor. output of two gates can be tied together using a wired AND method. In cae of open collector, power dissipation is high due to the current flowing trough the extra resistors.
What do you call active pull up on a totem pole?
Since an active device is used for charging CL, this operation is called as active-pull-up. Thus active-pull-up consists of T3 on top of T4.