What are the exceptions to the lockout/tagout requirements?

What are the exceptions to the lockout/tagout requirements?

Note: Exception: The employer need not document the required procedure for a particular machine or equipment, when all of the following elements exist: (1) The machine or equipment has no potential for stored or residual energy or reaccumulation of stored energy after shut down which could endanger employees; (2) the …

When can tagout be used in place of lockout?

Tagout should only be used with lockout, unless locking out the equipment is impossible. Equipment should be locked out while being repaired.

What is the OSHA standard for lockout tagout?

The OSHA standard for The Control of Hazardous Energy (Lockout/Tagout), Title 29 Code of Federal Regulations (CFR) Part 1910.147, addresses the practices and procedures necessary to disable machinery or equipment, thereby preventing the release of hazardous energy while employees perform servicing and maintenance …

When can an employer use a tagout system on equipment that is capable of being locked out?

After January 2, 1990, whenever replacement or major repair, renovation or modification of a machine or equipment is performed, and whenever new machines or equipment are installed, energy isolating devices for such machine or equipment shall be designed to accept a lockout device.

What are the 6 steps of lock out/tag out?

A lockout/tagout procedure should include the following six steps:

1. Preparation.
2. Shutdown.
3. Isolation.
4. Lockout/tagout.
5. Stored energy check.
6. Isolation verification.

What information must be attached to all lockout locks?

Why the lockout/tag out is required (repair, maintenance, etc.). Time of application of the lock/tag. The name of the authorized person who attached the tag and lock to the system.

What is the difference between a lockout and tagout?

Lockout means to place a lock on a device that prevents energy release. Tagout means to place a tag on a switch or other shut off device that warns not to start that piece of equipment.

What are the six steps of lock out/tag out?

What is the lockout/tagout procedure?

The term “lockout tagout” refers specifically to procedures used to ensure that equipment is shut down and inoperable until maintenance or repair work is completed. They are used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.

What is the correct order for proper lockout procedure?

Steps of a lockout/tag out program include:

1. Prepare for shutdown.
2. Notify all affected employees.
3. Equipment Shutdown.
4. Isolation of system from hazardous energy.
5. Dissipation (removal) of residual or stored energy.
6. Lockout/Tag out.
7. Verify Isolation.
8. Perform Maintenance or Service Activity.

Who can remove a lockout/tagout device?

Lockout or tagout device removal: Each lockout or tagout device must be removed from the energy-isolating device by the employee who applied the device [29 CFR 1910.147(e)(3)].

How are lockout points used in isolate and tagout?

If two or more people are working on plant that is isolated through several lockout points, each person should attach a lock and tag to each lockout point. The need for multiple locks on each lockout point can be avoided by using a lock box. The lock box system uses only one lock at each lockout point.

What does a tag mean in energy isolating device?

A prominent warning device, such as a tag and a means of attachment, which can be securely fastened to an energy isolating device in accordance with an established procedure, to indicate that the energy isolating device and the equipment (or machine) being controlled may not be operated until the tagout device is removed.

How are verification tags used for lockout devices?

Additionally, as part of the energy control procedure, the maintenance group will verify the lockout and hang a tag on each lockout device as part of this verification process.(1) Each person working on the job will then affix a personal lock onto the lockbox. Question 1: Is this verification tag a tagout device?

What does a personal danger tag on isolation devices mean?

A personal danger tag on the isolation devices of an item of equipment is a warning that the equipment is unsafe and that operating the equipment may endanger the person who attached the tag. Personal danger tags should be restricted to employees who will be working on equipment.