Contents
What are the features of an analog switch?
The ideal analog switch has no on-resistance, infinite off-impedance and zero time delay, and can handle large signal and common-mode voltages.
What’s the difference between analog switches and multiplexers?
Today, analog switches and multiplexers are available in a wide variety of configurations, options, etc., to suit nearly all applications. On-resistances less than 0.5 Ω, picoampere leakage currents, signal bandwidths greater than 1 GHz, and single 1.8-V supply operation are now possible with modern CMOS technology.
What is the peak voltage of an arbitrary waveform generator?
The amplifier is excited by a large-multisine signal generated by an arbitrary waveform generator. The multisine signal consists of 500 spectral components between 700 MHz and 1 GHz. The peak voltage amplitude of the multisine in the time domain is 2 V.
Output ripple is a residual ac output voltage that is coherently related to the switching operation of the regulator. Its fundamental frequency is the same as the regulator’s switching frequency. Switching transients are high-frequency oscillations that occur during switching transitions.
Can a CMOS switch be used as a resistor?
Real CMOS analog switches meet none of these criteria, but if we understand the limitations of analog switches, most of these limitations can be overcome. CMOS switches have an excellent combination of attributes. In its most basic form, the MOSFET transistor is a voltage-controlled resistor.
What’s the temperature range of a CMOS switch?
of CMOS switches are specifically designed for less than 0.5 Ω on- resistance and are fabricated on a sub-micron process. These devices can carry currents up to 400 mA, operate on a single 1.8 V to 5.5 V supply (depending on the particular device), and are rated over an extended temperature range of –40°C to +125°C.
What is max14689 beyond the rails ( DPDT ) switch?
The MAX14689 ultra-small, low-on-resistance (R ON) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails™ capability that allows signals from -5.5V to +5.5V to pass without distortion, even when the power supply is below the signal range.