What are the main advantages of recording audio using a multi channel field mixer?
A portable field mixer allows a sound person to quickly access various controls that may need a speedy adjustment during a production. With the mixer close at hand, the sound person can adjust the live microphone levels, adjust their headphone volume, check what the mix sounds like inside and outside of the mixer, etc.
What are the benefits of an audio mixer?
An audio mixer comes with plenty of features and versatility, like more inputs and outputs for routing sources through aux send, busses and direct outs. This gives you the ability to route audio in and out of your DAW through the console for a individual control over each track.
Can I use my Behringer mixer as an audio interface?
Thanks to the built-in, bi-directional stereo USB audio interface, you can connect your X1204USB directly to your PC or Mac computer via a single USB cable. Now any signal source you connect to the mixer can be recorded directly to your hard drive.
What do you mean by audio interface mixer?
When we’re referring to audio interface mixers, we’re talking about an audio mixer that has a built-in audio interface for your computer and that can also function as a standalone mixer without connecting to a computer.
How does an audio interface work in a DAW?
The 4-channel audio interface allows you to record each audio source on a separate track in your DAW at the same time The key thing about an audio interface is it is designed from the ground up to allow you to record on separate tracks. So the Scarlett 4i4 has 4 inputs, and you can set up your DAW to record each input separately.
When do you need a dedicated audio mixer?
A dedicated mixer can be optional if you only tend to record from one to two sound sources — but the audio interface is another story. If you want high-quality audio, this device is absolutely essential.
What are the benefits of using a hardware mixer?
A big benefit of working with a hardware mixer is the immediate, hands-on control. Need to turn up a channel in your headphone mix? Just reach out and turn up the corresponding aux control — no need to open up a software control panel. Want to apply some EQ and compression to polish your sound on the way in?