Contents
What can damage an oscilloscope?
Inadequate air flow can cause excessive operating temperatures, which can lead to oscilloscope failure. ESD can damage or destroy the electronics behind the inputs of an oscilloscope. In general, higher bandwidth inputs are more susceptible to ESD damage than lower bandwidth inputs.
Can you use an oscilloscope as a power supply?
The oscilloscope can be used to compute power. This is shown in Figure 4 where the two upper waveforms are respectively voltage and current at the input of a power supply. These two waveforms are multiplied point-by-point to provide the power waveform at the bottom.
How do I connect my DSO to my computer?
The PC-based DSO-2102 Oscilloscope connects to the parallel port of your computer. To install the Oscilloscope all you need to do is plug it into your printer port, plug in the the power supply and run the install software. The DSO is about the size of a video tape (7″ x 3.75″ x 1.2″).
How do I connect Tektronix to my computer?
Connect the A/host end of the USB cable to your computer and the B/device end to your scope. Go to the Search Criteria Menu in OpenChoice Instrument Manager. Select USB and make sure it is activated, click OK, and click Update on the main panel.
How do you handle an oscilloscope?
An example of an oscilloscope display. A signal (the yellow sine wave in this case) is graphed on a horizontal time axis and a vertical voltage axis. Controls surrounding the scope’s screen allow you to adjust the scale of the graph, both vertically and horizontally — allowing you to zoom in and out on a signal.
How can I use my PC as an oscilloscope?
Using PC Like an Oscilloscope What you now require is software that will enable your PC to work as an oscilloscope; you can purchase this from Zelscope. If you own a PC with a fast processor, about 1GB RAM, about 1MB of free Hard disk space, and at least one 32-bit sound card, you are set up for converting your PC into an oscilloscope.
What’s the difference between a USB and PC oscilloscope?
It is also interesting to note that many boxed digital oscilloscopes adopt exactly the same approach and have the same basic circuit blocks, the only real difference is that the USB scope uses an external PC or other computer for the control and display. One of the key elements of the PC oscilloscope is naturally the USB link.
How is an oscilloscope used in the real world?
Oscilloscopes are commonly used to observe the exact wave shape of an electrical signal. In addition to signal amplitude, oscilloscopes can show time distortion between two events (such as pulse width, period, or rise time) and relative timing of two related signals Below is a picture of common Oscilloscope.
How much does it cost for an oscilloscope?
As an electronics enthusiast or a hobbyist, you probably yearn for an oscilloscope to check out those elusive waveforms in your amplifier or radio. However, the cost deters you. A reasonably good oscilloscope will set you back by several hundred dollars, unless you buy a pre-owned piece or get one at the flea market.