Contents
What can the ICM 20948 be used for?
The ICM-20948 itself is an extremely low powered, I 2 C and SPI enabled 9-axis motion tracking device that is ideally suited for smartphones, tablets, wearable sensors, and IoT applications.
Can you connect VDD to 1.8V without level shifters?
If your board allows you to make separate connections to VDD (on pin 13) and VLOGIC (on pin 8), leave VDD on 3.3V and connect VLOGIC to 1.8V. Connect the pull-up resistors on SDA and SCL to 1.8V.
Can a I2C sensor work with 1.8V levels?
I have problems detecting an MPU-6050 I2C device on the Intel Edison Mini breakout board (it only supports 1.8V levels). According to the thread here, it might be possible to get the sensor working with 1.8V levels: “The MPU-6050 also supports different supply (VDD) and I/O interface (VLOGIC) voltages.
What kind of voltage does the ICM need?
The ICM is a fickle fellow – optionally allowing a 3.3V supply voltage but requiring I/O to work at 1.8V. This is just the price we pay for amazing technolojay (hey that rhymes). Since there aren’t many popular development boards that run at the voltage of the future we’ve added high speed level shifting to each and every IO pin.
How to use ICM 20948 in SparkFun IMU?
Once you’ve installed the ICM-20948 library, load the first example sketch from File -> Examples -> SparkFun 9DoF IMU Breakout – ICM 20948 – Arduino Library -> Arduino -> Example1_Basics. Having a hard time seeing? Click the image for a closer look.
What kind of voltage does the icm20948 run on?
What’s more, the ICM20948 runs on 1.8V which is increasingly common for device manufacturers but isn’t hardly common for makers, learners, prototypers or the like.
Is the InvenSense icm20948 a 9 DOF IMU?
The ICM20948 from Invensense packs 9 Degrees of freedom into a teeny package, making it a one stop shop for all the DOFs you need! Within it’s svelte 3x3mm package there are not just one MEMS sensor die like your common sensors, but two sensor dies!