Contents
What does brake light fault mean?
When your car’s brake warning light comes on, it tells you something is wrong with the braking system; it can’t be put off or ignored until later—the price for doing so could very expensive and very dangerous.
Where is the brake light fuse located?
power distribution center
Like all fuses, the brake light system fuse can be found in the power distribution center, which is under the dashboard or tucked away underneath the hood. Never heard of the power distribution center? It’s just the technical name for a fuse box.
Can I drive with brake light on?
Driving with the Brake Warning Light on should not be done as this is dangerous. It means your brakes are not working properly and need to be repaired as soon as possible.
Which fuse is it for the brake lights?
The stop lamp fuse is in the left kick panel inside the vehicle. It is a 15amp fuse that powers the stop light switch on the brake pedal. The brake light switch sends power to rear brake lights.
What causes a light bulb to burst in a Kia Rio?
Residual oil may cause the bulb to overheat and burst when lit. A bulb should be operated only when installed in a headlight. If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it. Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.
How to change light bulbs in Kia Forte?
Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the “LOCK”position and turn off the lights to avoid burning your fingers or receiving an electric shock. Use only the bulbs of the specified wattage. Be sure to replace the burnedout bulb with one of the same wattage rating.
Why does my Kia 4WD warning light go off while driving?
When the ignition switch is turned to the ON position the 4WD system warning light will illuminate and then go off in a few seconds. If the 4WD system warning light illuminates while driving, this indicates a malfunction with the 4WD system. If this occurs have the vehicle checked by your nearest Kia dealer.
How to install a headlight bulb on a Kia Rio?
Install the headlight bulb cover by turning it clockwise. Follow the steps 1 to 4 from the previous section. 5.Remove the headlight bulb cover by turning it counterclockwise. 6.Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.