Contents
What does check VSA system mean on Acura TSX?
Vehicle Stability Assist system
The Vehicle Stability Assist system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. If the VSA system indicator stays on, or comes back on while driving, have the VSA system inspected by an Acura dealer.
What does it mean when it says check VSA system?
If the VSA System Indicator lights up and stays on, it means there’s a problem with the system itself. If you see it, pull over when it’s safe to do so, and turn the engine off and then back on. If the light returns, then arrange a service inspection to diagnose the fault.
How do you check the VSA system?
If the VSA indicator comes on while driving, pull to the side of the road when it is safe and turn off the engine. Reset the system by restarting the engine, and watch the VSA system indicator. If the indicator remains on, or comes back on while driving, have the VSA system inspected by your Acura dealer.
Should VSA be on or off?
Leave it on unless you’re stuck in snow and not moving. VSA helps to stabilize the vehicle during slippery conditions, in both straight line accelerating, and cornering situations.
How do you turn the VSA light off?
Press and hold the VSA OFF button until you hear a beep to turn VSA on or off. The VSA Off indicator appears when the system is off. When VSA is off, traction control stops functioning, which allows the wheels to spin more freely at low speed.
Can you drive with VSA light on?
Is it safe to drive with VSA light on? You can continue to drive with the VSA warning light on, as you will have normal braking and cornering abilities, just without the stability enhancements the VSA System provides.
When should I use VSA?
Should I turn VSA off in snow?
According to the owner’s manual here is when you should turn it off. If your vehicle gets stuck in sand, mud, or fresh snow. You will be able to free your vehicle much easier with it turned off. Some drivers will turn off VSA as they claim you have better road feel.
What does the VSA light mean on an Acura TSX?
Triangle with Exclamation Point This VSA light indicates that the system is currently activated, which means that it is actively helping keep your TSX safe. If this light stays on at all times, it probably means that the VSA system has been switched off. This is easy enough to do, there is a button that says VSA on it.
How does VSA work on an Acura RDX?
Traction – If your Acura can’t get enough traction, the VSA system will limit wheel slip in order to keep you in control of the vehicle. It’ll also lower the engine speed to accomplish this. There are warning lights associated with the VSA system.
What to do if your Acura TSX has a problem?
Just like with any other major vehicle problem, you’re going to want to get a reading of your Acura’s diagnostic trouble codes. You can use a good code scanner, or you can take it to the local parts store and see if they will scan it for you. Most of them do. You’ll want to scan the ABS control unit, ECU, and steering control.
What does it mean when the VSA light is on?
The vsa light means that the Vehicle Stability Control or Traction Control has been activated. If the engine light is on and the vsa light is on, then there could be an issue with the traction control system. Check all of the wheel speed sensors and make sure that the are plugged in and working.