Contents
What does the Aiy voice kit from Google do?
The AIY Voice Kit from Google lets you build your own natural language processor and connect it to the Google Assistant or Cloud Speech-to-Text service, allowing you to ask questions and issue voice commands to your programs.
Is the Aiy voice kit a sound card?
As the HAT is the main hardware component in the AIY Voice Kit we should take a closer look at it. In many respects the AIY Voice HAT is really a fancy sound card. It takes input from the microphone board and digitizes it to send up to the Google Cloud.
How do you add vision to Aiy voice kit?
There’s a lot to do – so let’s dive in! Thread the Pi Camera ribbon cable through the Voice HAT so that the pins are facing away from the USB ports as shown below. Gently, lift both sides of the ribbon holder, insert the ribbon, and push the black plastic holder back down to hold the cable in place.
Can you connect Aiy projects to Google Assistant?
This project demonstrates how to get a natural language recognizer up and running and connect it to the Google Assistant, using your AIY Projects voice kit. Along with everything the Google Assistant already does, you can add your own question and answer pairs. All in a handy little cardboard cube, powered by a Raspberry Pi.
What kind of API does Google Assistant use?
The Google Assistant Service exposes a low level API that lets you directly manipulate the audio bytes of an Assistant request and response. Bindings for this API can be generated for languages like Node.js, Go, C++, Java for all platforms that support gRPC.
How can I create an applet with Google voice assistant?
To create an Applet, get into my applets and click on “New Applet”. Then in this “This” section select the Google voice assistant and in the “That” section select the Webhooks service. It is very similar to what we did with our IoT based door security project.
How to flash Google Assistant based voice controlled home automation?
To flash it connect the FTDI module and set the pin in programming mode as shown below. Then download the ESP8266_Flasher software and the firmware bin file from the given link. Then open the software and browse for the bin file using Bin button, then type in the right COM port and leave the address to be 0x00000 as default.