Contents
What does water injection do for a diesel?
Instead of intercooling, injecting water into a diesel engine can be used to control combustion and exhaust gas temperatures through a phase change. Known as the latent heat of vaporization of a liquid, when water turns to steam it sucks heat out of the air, which in a turbocharged diesel engine can be quite hot.
Can you run methanol in a diesel engine?
Diesel is used to ignite a methanol/air mixture while methanol is injected into the air intake of each cylinder to form a homogeneous mixture with the intake air. The DMCC engine has longer ignition delay and lower gas temperature due to the high latent heat of methanol.
Does meth injection increase torque?
Injection started once the preset boost level (5 psi) was reached. See all 22 photos Run on the dyno with the Snow Boost Cooler water/meth injection, the peak power numbers jumped to 868 hp and 747 lb-ft of torque, but the gains in the middle of the rpm range were as high as 44 hp.
Why do pulling tractors inject water?
The water acts as a cooling agent in the compressed air from the turbo, thus more air thus more power as long as you have more fuel. if you watch pulloff.com classifieds he may find some used stuff.
What happens when diesel and water mix?
Just like oil and water, diesel and water don’t mix – they separate. That water will cause your tank to rust and algae to grow. The rust floats around, clogging and damaging your fuel filters. Bacteria produce waste and continue to destroy the engine and parts.
How much HP can water meth add?
It’s the optimized controls of the Boost Cooler system (ramp rates, pressure activation) that make this percentage of methanol injection even possible, and with peak gains of 74 hp and 164 lb-ft at a safe 50/50 mix, the potential of this sophisticated system is proven.
How much does water increase with meth?
Depending on the system, timing can often be advanced 10 or more degrees when a water/methanol system is used. Boost can often be increased five or more psi.
How can you tell if you have water in your diesel?
If you think your diesel has been contaminated with water, some telltale signs to watch for include:
- A loss of RPM and power in the machine.
- Rough starting or erratic idling.
- Trouble or a lag in acceleration when stepping on the pedal.
- Abnormal exhaust such as white smoke.