Contents
- 1 What is a discontiguous subnet?
- 2 What is contiguous IP address?
- 3 How many IP addresses are in a subnet?
- 4 What is the maximum number of paths equal load balancing can support?
- 5 Is Discontiguous an English word?
- 6 Is there such a thing as a discontiguous subnet?
- 7 How is a contiguous network different from a discontiguous network?
What is a discontiguous subnet?
Discontiguous subnets means that to go from one subnet of a network to another subnet of that network you must go through subnets of a different network. For example if you are in subnet 10.10.10.0 and to get to 10.30.30.0 you must go through 172.16.10.0 then that would be discontiguous.
What is contiguous IP address?
A Contiguous network is a single Class A, B, or C network for which all routes to subnets of that network pass through only other subnets of that same single network. A discontiguous network will have two or more subnetworks of a classful network connected together by different classful networks.
How many IP addresses are in a subnet?
Essentially, a subnet is a smaller portion of the network within class A, B, or C. Creating and using subnets can help to keep your network organized and functional. Each IP address block can create 254 IP addresses, which allows 254 x 4 total IP addresses to be created for use in the network.
What is Discontiguous network?
A discontiguous network is a network in which packets sent between at least one subnet must pass through subnets of a different network. In simple terms, a network is considered a contiguous network when a host of the network can access any part of the same network without going outside the network.
What does Discontiguous mean?
Not contiguous in space; not touching or adjacent; disconnected, separate. Also: consisting of non-adjacent parts; characterized by spatial discontiguity.
What is the maximum number of paths equal load balancing can support?
Six different paths configured is the maximum number.
Is Discontiguous an English word?
adjective. Not contiguous in space; not touching or adjacent; disconnected, separate.
Is there such a thing as a discontiguous subnet?
“IP subnet design traditionally has not allowed discontiguous networks. A contiguous network is a single Class A, B, or C network for which all routes to subnets of that network pass through only other subnets of that same single network.
How can you support Rip and discontiguous networks?
Recall that discontiguous networks have subnets of the same major network, separated by a different major network. RIP does not carry a prefix mask, and it summarizes at the natural classful length mask. This raises another issue: How can you support discontiguous networks?
What does it mean to subnet an IP network?
A subnet is division of an IP network (internet protocol suite), where an IP network is a set of communications protocols used on the Internet and other similar networks. It is commonly known as TCP/IP (Transmission Control Protocol/Internet Protocol). The act of dividing a network into at least two separate networks is called subnetting,
How is a contiguous network different from a discontiguous network?
If all subnets of a network are organized in such a way that their hosts can communicate with each other without going outside the network, the network is contiguous. If a host takes a route to communicate with other hosts of the same network that belongs to a different network, the network is discontiguous.