Contents
- 1 What is aperture jitter?
- 2 What is jitter in DAC?
- 3 What is aperture effect in ADC?
- 4 How does jitter sound?
- 5 Why is aperture time important?
- 6 What is aperture effect?
- 7 What are the specifications of an analog to digital converter?
- 8 How is NSD calculated for an analog converter?
- 9 What are the timing specifications for a DAC converter?
What is aperture jitter?
This sample-to-sample variation in the instant the switch opens is called aperture uncertainty, or aperture jitter and is usually measured in rms picoseconds. The effects of phase jitter on the external sampling clock (or the analog input for that matter) produce exactly the same type of error.
What is jitter in DAC?
Jitter is the time distortions of recording/playback of a digital audio signal. Jitter is thus a deviation of time between the digital and analog samples (deviation of the sampling rate).
What is aperture effect in ADC?
Aperture uncertainty is a key ADC concern when performing IF sampling. Second, it can contribute to the uncertainty in the actual phase of the sampled signal itself giving rise to increases in error vector magnitude. Third, it can heighten intersymbol interference (ISI).
What is aperture time in ADC?
Aperture time is the period during which the ADC is reading the input signal. Resolution, measurement speed, and frequency rejection are functions of the aperture time. The larger the aperture time, the better the resolution.
What is aperture time?
Aperture time is the period during which an ADC reads the voltage or current on a power supply or SMU. Aperture time can be specified in seconds (s) or power line cycles (PLCs). Measurement resolution, measurement speed, and frequency rejection are all functions of aperture time.
How does jitter sound?
Jitter in digital audio does manifest itself as noise in the signal. But like you said, it’s way below audible levels, unless the recording is done at a ridiculously low level. It can’t do anything else, and certainly not “smear” anything at all.
Why is aperture time important?
How Aperture Affects Exposure. Aperture has several effects on your photographs. One of the most important is the brightness, or exposure, of your images. As aperture changes in size, it alters the overall amount of light that reaches your camera sensor – and therefore the brightness of your image.
What is aperture effect?
In fact, the high frequency roll-off of H(f) acts like a low-pass filter and thus attenuates the upper portion of message signal spectrum. These high frequencies of x(t) are affected. This type of effect is known as aperture effect.
What does aperture time mean?
The aperture time (limitation 1) is the time required for the sampling gate to close after a sample is acquired. In an ideal situation, the aperture time is zero and the output signal of the S&H is proportional to the signal value immediately before the sampling instant.
What is the aperture jitter on an ADC?
Aperture jitter is the internal clock uncertainly to the ADC. The noise performance of the ADC is limited by the clock jitter, both internal and external. In a typical data sheet, aperture jitter is for the converter only.
What are the specifications of an analog to digital converter?
Analog-to-digital converters (ADCs) have many specifications; some are more important for a given application than others. Understanding these specifications and controlling external devices affecting the ADC will lead to better performance.
How is NSD calculated for an analog converter?
NSD can be calculated by knowing the sample rate, input range, SNR, and input impedance (for dBm/Hz). Once these are known, a converter can be selected to match the analog performance of the front-end circuitry.
What are the timing specifications for a DAC converter?
ADC SPARKLE CODES, METASTABLE STATES, AND BIT ERROR RATE (BER) 6.163 DAC DYNAMIC PERFORMANCE 6.167 DAC SETTLING TIME 6.167 GLITCH IMPULSE AREA 6.168 DAC SFDR AND SNR 6.170 MEASURING DAC SNR WITH AN ANALOG SPECTRUM ANALYZER 6.172 OTHER AC SPECIFICATIONS 6.173 REFERENCES 6.175 SECTION 6.7: TIMING SPECIFICATIONS 6.177