Contents
What is ATMEGA168?
The ATMEGA168-20AU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 512B EEPROM, an 8-channel/10-bit A/D converter (TQFP and QFN/MLF) and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20MHz and operates between 2.7 to 5.5V.
How many PWM outputs are there in ATMEGA168?
Each of the 6 PWM output lines can be set into 1 of 4 output modes….PWM output lines on ATmega168A.
| COMxx1 | COMxx0 | Description |
|---|---|---|
| 0 | 1 | For timer mode 3, Normal port operation, no PWM For timer mode 7, toggle output on compare match |
What is the flash memory size of atmega1280?
Technical Attributes
| Description | Value |
|---|---|
| Product Dimensions | 14 x 14 x 1 mm |
| Program Memory Size | 128 KB |
| Program Memory Type | Flash |
| RAM Size | 8 KB |
What is Atmega2560?
Atmega2560, commonly found in the Arduino Mega 2560 as its main microcontroller. It’s an AVR RISC-based microcontroller that executes powerful instructions in a single clock cycle. This allows it to strike a fine balance between power consumption and processing speed.
What is the operating voltage of ATmega2560?
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may become unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
What are the differences between Atmel and ATmega168?
The Atmel®ATmega88 and ATmega168 differ only in memory sizes, boot loader support, and interrupt vector sizes. Table 2-2 summarizes the different memory and interrupt vector sizes for the three devices. ATmega88 and ATmega168 support a real read-while-write self-programming mechanism.
Which is the highest standard for Atmega88 microchip?
The high temperature automotive ATmega88 and ATmega168 have been developed and manufactured according to the most stringent requirements of the international standard ISO-TS-16949 grade 1. This data sheet contains limit values extracted from the results of extensive characterization (temperature and voltage).
Is the pinout ATmega88 / 168 1.1 based on simulations?
Pinout ATmega88/168 1.1 Disclaimer Typical values contained in this datasheet are based on simulations and characterization of other AVR®microcontrollers manufactured on the same process technology. Min and Max values will be available after the device is characterized.
Which is Atmel microcontroller does 1mips per MHz?
The Atmel® ATmega48/V/ 88/V /168/V is a low-power CMOS 8-bit microcontroller based on the AVR ® enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega48/V/ 88/V /168/V achieves throughputs close to 1MIPS per MHz.