Contents
What is cable select IDE?
Cable select, also referred to by the acronym CS, is a disk drive jumper setting which automatically sets the priority of a disk drive by its position on its data cable. For cable select to work, an IDE/EIDE drive must have its jumpers set to CS and be using a cable that supports cable select.
Are IDE connectors still used?
IDE popularly came to be known as PATA, for their parallel style of data transfer. IDE originally had 40-pin and 80-ribbon cables. While some of these are still in use, modern IDEs with 28 pins are found in most machines. These cables offered flexibility as well as better cooling effects.
Is IDE Eide a data cable?
It was developed by Western Digital and an interface used on IBM compatible computers. EIDE supports data rates from 4 and 16.6 MBps. Below, is a picture of the hard drive IDE connector and an IDE cable that connects the drive to the motherboard.
For what can we use IDE connector?
IDE, an acronym for Integrated Drive Electronics, is a standard type of connection for storage devices in a computer. Generally, IDE refers to the types of cables and ports used to connect some hard drives and optical drives to each other and to the motherboard.
How many wires can be found in an IDE ribbon cable for a hard disk?
IDE ribbon cables have either 40 or 80 wires. There is a connector at each end of the cable and another one about two-thirds of the distance from the motherboard connector.
Is IDE and PATA the same?
While IDE and ATA are very closely related, they are not the same thing. IDE has been reverse-acronymed as PATA since the interface was a parallel connection using the ATA standard.
What is difference between IDE and SCSI?
SCSI is capable of supporting up to 7 or 15 devices. IDE is commonly an easier product to set up than SCSI. Configuring SCSI can be more difficult for most users compared to IDE. Unlike IDE, SCSI requires an interface expansion card in most cases (unless the motherboard already has it).
What is the full meaning of IDE cable?
Integrated Drive Electronics
IDE, an acronym for Integrated Drive Electronics, is a standard type of connection for storage devices in a computer. Generally, IDE refers to the types of cables and ports used to connect some hard drives and optical drives to each other and to the motherboard.
How many wires does the standard IDE drive cable have?
Which is the IDE cable for cable select?
This allows the IDE cable itself to select the drive’s role: all the drives have the CS jumper set, and the cablechooses the master and the slave. Pin 28 on the IDE ribbon cable is used for cable select. If a drive sees this signal as grounded, it’s the master, but if it floats (unconnected), it is the slave.
How does the IDE cable select the slave role?
All IDE drives have jumpers that select the “master” or “slave” role on the controller, but modern drives also have a “CS” or “Cable select” pin. This allows the IDE cable itself to select the drive’s role: all the drives have the CS jumper set, and the cablechooses the master
How can I make a CS Cable from an IDE cable?
Modifying an IDE cable – the “easy” way It’s possible to easily make a CS cable by modifying a “regular” one. Lay out the IDE cable on a work surface, and consider the ribbon area between the two drive connectors (farthest away from the motherboard connector).
How does the IDE drive select the Master?
All IDE drives have jumpers that select the “master” or “slave” role on the controller, but modern drives also have a “CS” or “Cable select” pin. This allows the IDE cable itself to select the drive’s role: all the drives have the CS jumper set, and the cablechooses the master and the slave.