Contents
What is MII port?
MII (media-independent interface) is the standard used to connect the MAC (media access control) block to the PHY (physical) layer for networking devices. These two portions of an overall Ethernet networking device perform different functions within the OSI (open systems interconnect) model.
Is RGMII Mii compatible?
Is RGMII compatible with MII/RMII ? Unfortunately a host with a RMII only port cannot connect to a RGMII PHY, it will not work out of the box, because two-bits(lines) of data, for RMII and 4-bits(lines) for RGMII.
What is Rgmii interface?
The RGMII interface is the physical connection between the Ethernet PHY and the Ethernet MAC. The RGMII interface is a dual data rate (DDR) interface that consists of a transmit path, from FPGA to PHY, and a receive path, from PHY to FPGA. Both paths have an independent clock, 4 data signals and a control signal.
What is MDIO interface?
The MDIO Interface component supports the Management Data Input/Output, which is a serial bus defined for the Ethernet family of IEEE 802.3 standards for the Media Independent Interface (MII). The MII connects Media Access Control (MAC) devices with Ethernet physical layer (PHY) circuits.
How is the GMII interface different from the Mii interface?
GMII interface is shown in Fig 14. 2. Compared with the MII interface, the data width of the GMII is changed from 4 bits to 8 bits. The control signals in the GMII interface such as TX_ER, TX_EN, RX_ER, RX_DV, CRS, and COL function the same as those in the MII interface.
Which is serial gigabit media independent interface ( SGMII )?
The serial gigabit media-independent interface (SGMII) is a variant of MII used for Gigabit Ethernet but can also carry 10/100 Mbit/s Ethernet. It uses differential pairs at 625 MHz clock frequency DDR for TX and RX data and TX and RX clocks. It differs from GMII by its low-power and low pin-count 8b/10b -coded SerDes.
What’s the difference between RGMII and GMII?
RGMII, or reduced GMII, is a simplified version of GMII, which reduces the number of interface signal lines from 24 to 14 (COL/CRS port status indication signals, not shown here), the clock frequency is still 125 MHz, and the TX/RX data width is changed from 8 to 4 bits.
How is the media independent interface ( MII ) defined?
The media-independent interface (MII) was originally defined as a standard interface to connect a Fast Ethernet (i.e., 100 Mbit/s) media access control (MAC) block to a PHY chip. The MII is standardized by IEEE 802.3u and connects different types of PHYs to MACs.