Contents
What is the DHCPv6 client?
DHCPv6 Client Overview A Juniper Networks device can act as a Dynamic Host Configuration Protocol version 6 (DHCPv6) client, receiving its TCP/IP settings and the IPv6 address for any physical interface in any security zone from an external DHCPv6 server.
What is DHCPv6 in router?
The Dynamic Host Configuration Protocol version 6 (DHCPv6) is a network protocol for configuring Internet Protocol version 6 (IPv6) hosts with IP addresses, IP prefixes and other configuration data required to operate in an IPv6 network. DHCPv6 prefix delegation provides a mechanism for configuring such routers. …
How many DUIDs can each DHCPv6 client have?
By using the entire 128 bits of the DUID space in DHCPv6, there are 2128, or 340 undecillion, possible DUIDs.
How to disable or remove the DHCP server service?
Stop the DHCP Server service and disable it on all affected domain controllers. Click Start, type Run, type services.msc, and then click OK. In the list of services, look for a service titled DHCP Server. If it exists, double-click DHCP Server. On the General tab, under Startup type, select Disabled.
What does the DHCP server service do for You?
The DHCP Server service performs TCP/IP configuration for DHCP clients, including dynamic assignments of IP addresses, specification of DNS servers, and connection-specific DNS names.
Do you need a DHCP server for a domain controller?
Domain controllers do not require the DHCP Server service to operate and for higher security and server hardening, it is recommended not to install the DHCP Server role on domain controllers, but to install the DHCP Server role on member servers instead. To address this issue, carry out the following actions:
What’s the difference between DHCP and TCP / IP?
Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. DHCP allows hosts to obtain required TCP/IP configuration information from a DHCP server.