Contents
What is the difference between a passive tag and an active tag?
Active RFID tags have a transmitter and their own power source (typically a battery). Passive tags have no battery. Instead, they draw power from the reader, which sends out electromagnetic waves that induce a current in the tag’s antenna.
Passive RFID system tags don’t need a battery because they collect their energy from the reader’s interrogation signal. To read tags in this arrangement, a reader will send out a powerful signal to all tags in its read frequency range.
Which type of RFID technology has the slowest data transfer rate?
Low frequency (LF) tags generally operate at 125–134 kilohertz, meaning, they usually have slower data transfer rates than their high frequency or ultra-high frequency counterparts.
How long does a passive RFID tag last?
Depending on how often the tag transmits data, the battery can last five to ten years. Passive tags have no battery, so there is no such shelf life to the tag.
Unlike active RFID tags, passive RFID tags only have two main components – the tag’s antenna and the microchip or integrated circuit (IC). As the name implies, passive tags wait for a signal from an RFID reader. The reader sends energy to an antenna which converts that energy into an RF wave that is sent into the read zone.
What makes up a passive RFID tag system?
Generally speaking, three main parts make up in a passive RFID system – an RFID reader or interrogator, an RFID antenna, and RFID tags. Unlike active RFID tags, passive RFID tags only have two main components – the tag’s antenna and the microchip or integrated circuit (IC).
How are active RFID tags used in toll booths?
Active RFID transponders are commonly used in secure access control and in toll booth payment systems. Beacons – In a system that uses an active beacon tag, the tag will not wait to hear the reader’s signal. Instead, true to its name, the tag will ‘beacon’, or send out its specific information every 3 – 5 seconds.
What’s the difference between embeddable and RFID tags?
Embeddable – If tagging an item becomes a problem for specific applications due to significant wear and tear, embeddable tags can fit in small crevices and be covered in epoxy so the RFID tag is out of harm’s way.