Contents
What is the operating voltage of the lm311?
LM311 is a dedicatedly designed high speed differential comparator responsible for comparing voltages. The operating supply voltage can range from -15 to +15V for OP-AMPs. This voltage is 5V if LM311 is to be used for logical operations. The compatibility of LM311 output with TTL and MOS circuits is quite good.
When to use a high speed lm311 comparator?
When designing LM311 comparator circuit, it should be noted that when a high-speed comparator is used for high-speed input signals and low source impedance input signals, the normal output response should be fast and stable.
What are the features of the lm311 pinout?
The isolation of system ground from all outputs and inputs is one of the key features of LM 311. The functionality of offset balancing along with strobe capability is easily possible. The available packages of LM311 are 8-pin SO, 8-pin SOIC, 8-pin PDIP, and 8-pin TSSOP.
Is the lm311 voltage comparator compatible with RTL-DTL?
Their output is compatible with RTL-DTL and TTL as well as MOS circuits and can switch voltages up to +50V at output currents as high as 50mA. Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application.
What’s the difference between lm311 and LM393?
If you want the foward output result, pin 7 is connected to the positive power supply and pin 1 is the output. If the result is to be output in reverse, pin 1 is grounded and pin 7 is the open collector output. lm311 and lm393 are both voltage comparators, so what is the difference between them?
Which is the inverting pin on the lm311?
Like all voltage Comparators the LM311 also has an Inverting Pin and a Non-Inverting Pin. If the voltage at the Non-Inverting Terminal (pin 2) is higher than the Inverting Terminal (pin 2), the output (pin 7) will also be high else the output will be low.
What are the connections of the lm311 comparator?
The basic comparator has five connections: Inverting input, non-inverting input, as well as an output, positive power supply, and negative power supply. Because the LM311 can operate from single rail supplies, and we are going to use it that way, this is how we’ll move forward.
https://www.youtube.com/watch?v=v5vQUAOSo8g