Contents
What is the output of an OR gate if the inputs are 1 and 1?
Combinational circuits are built of five basic logic gates: AND gate – output is 1 if BOTH inputs are 1. OR gate – output is 1 if AT LEAST one input is 1.
What does the logic 0 and 1 mean?
A. L. “Logic 0” and “logic 1” represent binary digits (0 and 1) or Boolean logic conditions (true and false). Thinking in terms of logic 0 and logic 1 allow engineers to design circuits and logic gates at a high level of abstraction that is removed from implementation considerations.
What will be the output if B 1?
therefore if A=1 and B=1 output will be 1.
Which gate produces a 0 if all its inputs are 1 and a 1 otherwise?
OR gate
B. False
| 1. | Logic diagrams and truth tables are equally powerful in expressing the processing of gates and circuits. A |
|---|---|
| 6. | The output value of an OR gate when both inputs are 1 is 1. A |
| 7. | The output of an OR gate when one input is 0 and one input is 1 is 0. B |
| 8. | The output value of an XOR gate is 0 unless both inputs are 1. B |
What does 1 and 0 represent in a logic gate diagram?
The simplest gate is the NOT gate, also known as an inverter. The output wire from the gate is in the off state, signifying 0. If the input is 1, the output is 0: A diagram showing a single wire going into a NOT gate.
What is output of this program?
Programs require data to be input. This data is used (processed) by the program, and data (or information ) is output as a result.
How to get output 1 for the following circuit?
To get output 1 for the following circuit, the correct choice for the input is. From left side the first gate is OR gate and next one is AND gate. So the out put of OR gate is A+B and the output of AND gate Y = (A+B).C
What is the output waveform of a logic circuit?
The logic circuit shown below has the input waveforms A and B as shown. Pick out the correct output waveform. 1. A mixture of light, consisting of wavelength 590 n m and an unknown wavelength, illuminates Young’s double slit and gives rise to two overlapping interference patterns on the screen. The central maximum of both lights coincide.
What kind of logic is used for output?
Devices that implement this logic are the (SN)74xx1G58, (SN)74xx1G97, and (SN)74xx1G98. CL. CL. You could simply use a buffer chip with an active low enable. Something like an SN74LV1T125 might work. Hook A to A, B to OE, Y is your output. Since the output tri-states, you will need a resistor to ground on the output.
Can a NOR gate be used to output a 1?
This can be implemented with an AND gate with one inverted input, or with a NOR gate with one inverted input. Devices that implement this logic are the (SN)74xx1G58, (SN)74xx1G97, and (SN)74xx1G98. CL. CL. You could simply use a buffer chip with an active low enable. Something like an SN74LV1T125 might work. Hook A to A, B to OE, Y is your output.
https://www.youtube.com/watch?v=2NUiKHWkRJs