Contents
What is the resolution of 8 bit ADC for input range of 8 volt?
An ADC generates a digital output that’s proportional to the ratio of the input voltage to the input range. The resolution (Δ or least significant bit) is this range divided by the total number of possible steps. For example, an 8-bit ADC with a 2.048-V input range has a resolution of 8 mV (2.048 V/28 steps).
What is the formula to calculate LSB voltage for an ADC?
2N equals the total number of ADC codes. The LSB size is equal to the full-scale input range (FSR) divided by the total number of ADC codes. This is equivalent to the step size of each code required to cover the entire input range.
What is the measure of ADC?
ADC has a resolution of one part in 4,096, where 212 = 4,096. Thus, a 12-bit ADC with a maximum input of 10 VDC can resolve the measurement into 10 VDC/4096 = 0.00244 VDC = 2.44 mV. Similarly, for the same 0 to 10 VDC range, a 16-bit ADC resolution is 10/216 = 10/65,536 = 0.153 mV.
How does an ADC convert an 8 bit value?
It has 8 inputs for the 8 bits to convert, one input for a reference voltage Vref and inputs for the power supply. The analog output voltage is a proportion of a reference voltage and the proportion based on the digital word applied.
Which is the correct formula for converting ADC input to voltage?
Assuming your maximum voltage (5V) equates to the maximum ADC input (12-bits = 4095), the following conversion should work for you: A quick inspection of the math with Excel leads me to believe this is correct. is the correct formula for converting the digital value back to (an approximation of) the analog voltage.
What’s the maximum voltage for a 12 bit ADC?
(And of course you’re using a 12-bit ADC, not a 3-bit one.) Note that even if the ADC value is the maximum possible value (4095 in your case), the corresponding analog voltage will be slightly less than the “full-scale” voltage (5 V in your case).
What is the ADC value on a PIC18 chip?
I’m using a PIC18 chip. The AD result register is ADRES: 16 bits, bit 15-12 are sign bits – positive is 1, negative is 0; bit 11-0 are data bits. Say for example I use Vdd (+5V) and Vss as reference values.