What is uplink and downlink frequency in mobile communication?

What is uplink and downlink frequency in mobile communication?

GSM-900 uses 890 – 915 MHz to send information from the Mobile Station to the Base Transceiver Station (BTS) (This is the “uplink”) and 935 – 960 MHz for the other direction (downlink), providing 124 RF channels spaced at 200 kHz. Duplex spacing of 45 MHz is used.

What is the relation between uplink and downlink frequency?

Uplink frequency is the frequency at which, the first earth station is communicating with satellite. The satellite transponder converts this signal into another frequency and sends it down to the second earth station. This frequency is called as Downlink frequency.

What is downlink and uplink in LTE?

LTE downlink transmission scheme is based on Orthogonal Frequency Division Multiple Access (OFDMA), while the uplink transmission is based on Single Carrier Frequency Division Multiple Access (SC-FDMA). Concerning uplink, LTE output power limits vary depending on the frequency band. The maximum TX power is 23 dBm [6].

Why is downlink frequency high?

All Answers (12) It say basically the power at ground stations is more as compared to power available at satellites.So generally frequency for uplink is kept higher than the downlink. There is greater attenuation due to rain when the signal frequency is high.so downlink is also kept at lower frequency.

What is difference between uplink and downlink?

In satellite telecommunication, a downlink is the link from a satellite down to one or more ground stations or receivers, and an uplink is the link from a ground station up to a satellite.

Is used in satellite communication?

Radio waves are used to carry satellite signals. These waves travel at 300,000 km/s (the speed of light). This means that a signal sent to a satellite 38,000 km away takes 0.13 s to reach the satellite and another 0.13 s for the return signal to be received back on Earth.

Which frequency is high uplink or downlink?

In satellite communication, the uplink frequency is higher than the downlink frequency because the attenuation level increase with an increase in frequency. The power at the ground station (Base Station) is more than compared to the power available at the satellite.

Why uplink is lower than downlink?

Since a mobile station (cellphone) cannot afford to transmit at high power to compensate for this loss, it must transmit on a lower frequency as a lower frequency presents lesser free space path loss. Therefore, mobile-to-base station (uplink) frequencies are lower than base station-to-mobile(downlink) frequencies.