What kind of transmission is in a 2006 Jeep Grand Cherokee?

What kind of transmission is in a 2006 Jeep Grand Cherokee?

The 2006 Jeep Grand Cherokee Laredo came standard with A5-speed automatic transmission. You’re going to need to use atf+4 fluid for this transmission. It will have a capacity of 14.4 US quarts for a full fill up and 5.5 US quarts for the initial fill.

How do I know what transmission I have in my Jeep Cherokee?

Locate the plate.

1. Lay on the ground on either side of the Jeep.
2. Slide under the Jeep to the transmission which is bolted to the motor. Look for a metal plate attached to the transmission. The transmission number is located on the plate. It is the only number on the plate. EX. 42RE.

How much is a Jeep Grand Cherokee transmission?

Jeep Grand Cherokee Transmission Cost The cost of a new Jeep Grand Cherokee transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less expensive, in some cases costing less than $150.

How do I identify my Jeep transmission?

The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep. The numbers on the identification plate provide the build date, part number and the build date.

What vehicles have the 42re transmission?

How Do I Order?

• 1989-2003 Dodge Dakota.
• 1998-2000 Dodge Durango.
• 1989-2001 Dodge Ram pickup 150 / 1500.
• 1989-2003 Dodge Ram Van B150 / B250.
• 1993-2004 Jeep Grand Cherokee.
• 1996-1998 Jeep Grand Cherokee 5.2 V8.

How can you tell if a transmission is 42RE?

Look for the transmission part/identification number and date code. According to the 42RE service manual on Scribd.com, the codes are located on the driver’s side of the transmission, stamped just above the oil pan gasket surface. The first group is the assembly part number, followed by the manufacturing date.

How long does a Jeep transmission last?

How long does a Jeep Wrangler transmission last? The number of years your transmission will last, is based on various factors. Setting aside defects, a moderately cared for Jeep Wrangler can last up to 200,000 miles.

What is the difference between a 42RE and an 44RE transmission?

The difference is how much torque they can handle. The 44 is a bit stronger than the 42. They have the same gear ratios. The 46 RE has a larger housing and a different 1st and 2nd gear.

What kind of transmission does a Jeep Grand Cherokee have?

44RE: A four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee’s with 5.2L engines. 42RE: A four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

What kind of transmission does a Jeep Comanche use?

AW4: A four speed automatic transmission was used in 1987 to 2001 Jeep Cherokee (XJ), & Jeep Comanche with 2.5L & 4.0L engines. It was also used in 1987 through 1992 Jeep Comanche & 1993 through 1993.5 Jeep Grand Cherokee with 4.0L engines.

What are the gear ratios on a Jeep Grand Cherokee?

Gear Ratios: 1st Gear: 2.74:1, 2nd Gear: 1.54:1, 3rd Gear: 1.00:1, 4th Gear: .69:1, Reverse Gear: 2.20:1 46RH: A four speed automatic transmission was used in 1993 to 1995 Jeep Grand Cherokees with 5.2L engines. Gear Ratios: 1st Gear: 2.45:1, 2nd Gear: 1.45:1, 3rd Gear: 1.00:1, 4th Gear: .69:1, Reverse Gear: 2.20:1

What kind of automatic transmission does a CJ have?

999: A medium duty 3 speed automatic used in CJs from 1980-1986. It was also used in 1984-1990 SJs and J pickups with the 4.2L engine, in the YJ from 1987-1991 with the 2.5L and 4.2L engine, and in the XJ and MJ through 1986. Gear Ratios: 1st Gear: 2.74:1, 2nd Gear: 1.54:1, 3rd Gear: 1.00:1, Reverse Gear: 2.03:1