What should you avoid when working with woodworking machines?

What should you avoid when working with woodworking machines?

The 10 Safety Rules Every Woodworker Should Know

• Wear The Right Clothes.
• Avoid Using Anything That Can Impair Your Reaction Time and Judgement.
• Disconnect Power.
• Use A Single Extension Cord.
• Never Use Blunt Blades & Bits.
• Check Stock for Existing Metal.
• Work Against The Cutter.
• Never Reach Over A Running Blade.

What should you not do in a woodshop?

10 Things to Avoid When Using Woodworking Machines

• Avoid Reaching Over the Blade.
• Avoid Distractions.
• Avoid Loose Clothing.
• Avoid Awkward Hand Positioning or Grip.
• Avoid Removing Sawdust or Cuttings by Hand.
• Avoid Using Compressed Air to Remove Sawdust or Cuttings.
• Avoid Leaving a Machine Running Unattended.

Which OSHA standards cover woodworking machinery safety?

29 CFR 1910.213(a)(4), Woodworking Machinery Requirements | Occupational Safety and Health Administration.

What are the hazards of woodworking?

The main health risk is occupational asthma caused by inhalation of wood dust. Substances such as wood dusts and resins, solvents, paints, varnishes and strong detergents however, will also damage the skin. This may lead to skin soreness, blotches, cracking, itching and blisters.

What is the 5’7 rule in woodworking?

Mark the edge of the first chamfer. Faia visualizes a “5/7” ratio to draw a new set of lines a little less than half- way from the reference lines to the cor- ner on each side. He chisels to these lines in creating the first chamfers. The first line indicates the edge of the curved section of the leg.

Do not try to stop the machine with your hand or body?

Others may not notice the machine is running and may be injured by moving parts. Do not try to stop the machine with your hands or body. Stopping the machine with your body can result in entanglement. Let the machine come to a stop naturally.

How far above the wood should the upper guard assembly be set?

Adjust blade guard height to about 3 mm or 1/8 inch to 6mm or 1/4 inch above the top of the material being cut. Wider gaps will place tension on the blade and increase the risk of breaking. Ensure the blade is tracking correctly and runs freely in and against the upper and lower guide rollers.

What standard requires a hood or guard on all hand fed crosscut table saws?

Hand-fed ripsaws. Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut.

What are the greatest hazards of woodworking?

The three main health hazards in woodworking are exposure to wood dust, excessive noise, and equipment vibration. Exposure to wood dust can cause a variety of health problems, including skin conditions, respiratory effects (such as asthma and chronic bronchitis), and cancer.

What are the safety precautions followed in the wood workshop?

What safety procedures should you follow when using woodworking machines?

• Always wear safety glasses or goggles, or a face shield (with safety glasses or goggles).
• Wear dust masks when required.
• Wear hearing protection that is suitable for the level and frequency of the noise you are exposed to in the woodworking area.

How to file a complaint with OSHA about woodworking tools?

1926.304 – Woodworking tools. Alert: Due to routine maintenance on the OSHA website, some pages may be temporarily unavailable. To report an emergency, file a complaint with OSHA or ask a safety and health question, call 1-800-321-6742 (OSHA).

What do you need to know about woodworking tools?

All fixed power driven woodworking tools shall be provided with a disconnect switch that can either be locked or tagged in the off position. Speeds. The operating speed shall be etched or otherwise permanently marked on all circular saws over 20 inches in diameter or operating at over 10,000 peripheral feet per minute.

What do you need to know about woodworking safety?

Ask questions if you have any doubts about doing the work safely. What safety procedures should you follow when using woodworking machines? Always wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear dust masks when required.

What should I do before starting a woodworking machine?

Make sure the guard is in position, is in good working condition, and guards the machine adequately before operating any equipment or machine. Check and adjust all other safety devices. Make sure the equipment is properly grounded before use. Check that keys and adjusting wrenches are removed from the machine before turning on the power.