Contents
What wire do I connect the blue remote wire to?
Simply connect another piece of blue primary wire to the blue wire in the wiring harness and run the primary wire back to the amplifier to terminate in the remote turn on terminal. To connect wire to wire, an appropriately sized butt connector or other style connector can be used.
Where does the blue and white wire go on a car stereo?
The right-front speaker wires are gray, left-front speakers are white, right-rear speakers are purple, and left-rear speakers are green. Ground wires are black, antenna wires are blue, and amplifier wires are blue with a white stripe.
Is power antenna the same as remote?
Hence the term “remote turn on wire”. Almost every aftermarket head unit has a remote turn on wire. Some manufacturers call it a power antenna wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on.
What is the blue wire on antenna adapter?
Installation note: A blue wire is attached to the antenna adapter. When installing the adapter, the blue wire should be connected to the antenna turn-on lead of your new car stereo.
What color is the reverse wire?
Reverse lights on a vehicle must be white in color, and these come standard on all vehicles. the easy thing to do is just look at the tail light from the insde as if you wanted to replace the reverse light. the 2 wires are going to be the positive and negative.
What color is the reverse wire on aftermarket radio?
Connect the Reverse ( Back ) Camera Detecting lead ( Blue color or Orange/White color in different model ) from radio harness with the positive terminal of Backup Light.
Do I need to connect the power antenna wire?
Yes, these two wires should be connected together. This is what allows the radio to retract the antenna when it isn’t being used. Just because your wiring harness has a connection for this wire, it doesn’t necessarily mean that your car has this kind of motorized antenna.
What kind of wire does pioneer radio use?
Green wire on interface connects to Parking Brake (LIGHT GREEN [-]) wire on Pioneer radio. (DO NOT connect this wire to anything else including the vehicles parking brake wire!) Blue wire on interface connects to Remote amp turn-on (BLUE/WHITE STRIPE [+]) on Pioneer radio.
What kind of wire is a remote turn on wire?
One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.
What’s the name of the Blue turn on wire?
The blue/white stripe remote turn on wire has a number of other names such as accessory wire, system remote control wire, etc… Some of the confusion about this wire may come from the different wiring methods between a factory and an aftermarket head unit. One thing to note, most head unit wiring harnesses also have a solid blue wire.
When to use remote turn on power antenna?
In older vehicles, wiring remote turn on to power antenna was very common and worked just fine because when the radio was on, the power antenna was up and working. But in newer vehicles, the power antenna may only be receiving power when the radio is in AM/FM mode.