Contents
When did I2C reference voltage decrease to 2 volt?
With the I2C specification 2.0 released 1998 the possible I2C reference voltage was decreased to 2 volt. Since the I2C bus lines are used bidirectionally, interfacing I2C devices with different voltages is not straightforward, special level-shifting devices are necessary for this purpose.
Is there a low capacitance I2C bus cable?
Even though there might be low capacitance cables on the market there is not much one can do about this except to lower the speed and to possible use a lower bus termination. As a general rule, on low voltage I2C systems the cables should be kept as short as possible and ribbon cables are preferable.
How are translator and bus coupler ICS I2C aware?
There are translator and bus coupler IC’s that are i2c aware or have an open-drain topology, but they must be explicitly picked. i2c uses a simple method to detect bus contention. Since logic 0 = LOW and logic 1 = X, logic 0 “beats” logic 1.
Do you need level shifting devices for I2C?
Since the I2C bus lines are used bidirectionally, interfacing I2C devices with different voltages is not straightforward, special level-shifting devices are necessary for this purpose. Things to consider when working with low voltage I2C systems.
When to compare 2 digital devices are interfaced Voh, Vil, Vol, IOL, IIH?
When 2 digital devices are interfaced VOH,VIL,VIH,VOL,IIH,IOL,IOH,IIH will be compared for 2 devices as an logic compatibility check. I have do the same check for I2C interface.
Why is I2C not used for long distance?
1 System Description I2C is typically thought of as an on-board solution and is not typically used for long distance communication due to some inherent limitations such as restrictions on bus capacitance. Conventional buffers can be used to extend the communication range across cables, but these solutions typically only
What is the purpose of the I2C bus?
The I2C bus is a very popular and powerful bus used for communication between a master (or multiple masters) and a single or multiple slave devices. Figure 1 illustrates how many different peripherals may share a bus which is connected to a processor through only 2 wires, which is one of the largest benefits
What’s the voltage level of an IO expander?
Apart from the bus speed more and more circuitry is moving to 3.3V or even 1.8V and below logic levels. An example is NXP’s IO expander PCA9554C.