Contents
When to use the lm2596 switching regulator?
The LM2596 is a commonly used popular step-down switching regulator IC. The adjustable version can take in input voltage from 4.5V to 40V and convert it to variable voltage sourcing upto of 3A of continues current. Because of its high current capability is commonly used in power modules to power/control heavy loads. Pin Number.
What is the current rating of the lm2596?
The LM2596 is known for its high current rating of 3A. It is available in many versions with fixed output voltage like 3.3V, 5V and 12V. But, the most famous one is the LM2596-ADJ which has variable output voltage.
What kind of voltage does a lm2596 buck converter produce?
LM2596 is a switching voltage regulator for step-down power management monolithic integrated circuits, capable of outputting 3A drive current, while having good linearity and load regulation characteristics. The fixed output versions of LM2596 are 3.3V, 5V and 12V, and the adjustable version can output various voltages less than 37V.
How is the output voltage of the lm2596-adj controlled?
As told earlier the output voltage of the LM2596-ADJ can be controlled by using the feedback pin. The aboce circuit diagram shows the feedback pin getting the feedback voltage from a voltage divider circuit formed with Resistors R1 and R2. The value of this R1 and R2 decides the output voltage of the IC.
What kind of circuit is the lm2596 buck converter?
The LM2596 switching voltage regulator is a step-down power management monolithic integrated circuit, which can output 3A drive current and has good linearity and load regulation characteristics. The output voltage will not be greater than the input voltage.
What does the lm2596 DC to DC converter do?
It is also known as DC-to-DC power converter or buck converter which is used to step down the voltage from its input supply to the output load. The current goes up during this voltage step down process. LM2596 comes with a remarkable load and line regulation.
Which is the feedback pin on the lm2596?
The ON/OFF or enable pin (pin 5) should be connected to ground to enable the IC. If made high the IC will enter shutdown mode and prevent leakage current. This feature will be useful to save input power when operating via battery. The feedback pin is the important pin which sets the output voltage.
Why are power relays used in printed circuit boards?
Power relays for printed circuit boards offer superior performance in high-capacity load switching in the power supply system owing to its material that can resist to contact arc and single contact structure (see figure). These power relays also retain excellent performance in contact volume and contact pressure.