Where should temperature sensors be placed in a room?
It’s best to put your temperature sensor:
- In a room where you spend a lot of time, such as your bedroom or living room.
- About chest high.
- Within a maximum of 50 feet (15 m) of your thermostat, so the sensor and thermostat can communicate wirelessly.
Why does my thermostat say the wrong temperature?
One of the most common reasons that your thermostat is incorrectly reading your home’s temperature is that the temperature sensor is malfunctioning or has failed completely. Cleaning the inside of your thermostat may fix the issue. If there is too much dust inside, the sensor will have trouble working correctly.
How is the temperature of an enclosure controlled?
Enclosure Temperature Control Influences of Heat Transfer Convection and thermal radiation are used most often to dissipate heat from enclosures. Because polymers are a thermal insulator, a common misconception exists that non-metallic enclosures operate at significantly higher temperatures than metal enclosures.
What happens when temperature sensor is out of range?
If you have an out of range error the input the temperature sensor is providing is out of the expected range according to the configured input on the controller. For example, if you had your controller setup for Type S thermocouple input it would expect a small range of mV.
Why is the top of an enclosure hotter than the bottom?
Since heat rises in air, many vertically mounted enclosures are hotter at the top than they are at the bottom. The material composition of the wall that the enclosure is mounted on will affect heat dissipation.
Why is my thermocouple reading high on my computer?
If your thermocouple is reading high, it could be because your sensor is located too close to a heat source. If your sensor is near a local heat source it could increase the temperature being measured as opposed to the position you wish to measure temperature. Check Temperature Transmitter Settings